Techno-UMG-Excelloy-PC-ABS (Dry-as-molded)
Techno-UMG-Excelloy-PC-ABS (Dry-as-molded) material properties: Density 1.043 g/cm3, Young's modulus 1.78 GPa, Yield strength 34.6 MPa (representative value...
Overview
polymer · commodity polymer grade — Dry-as-molded representative condition
Grade designation: Techno-UMG-Excelloy-PC-ABS-DRY
Techno-UMG-Excelloy-PC-ABS; manufacturer/trade: Techno; curated real material/grade family record
Curated real material/grade record. Techno trade or supplier catalog grade retained from grade name. Property values are representative literature ranges; consult linked references, standards, and manufacturer datasheets for design allowables.
Key material properties
| Density | 1.043 g/cm3 |
|---|---|
| Young's modulus | 1.78 GPa |
| Yield strength | 34.6 MPa (representative value; grade and condition dependent) |
| Thermal conductivity | 0.24 W/mK |
| Heat resistance / melting point | 100 C |
Published property ranges
| Density (g/cm3) | CAMPUS Plastics: 0.998–1.071; MatWeb: 0.968–1.04; Polymer handbook: 0.989–1.062 |
|---|---|
| Young's modulus (GPa) | CAMPUS Plastics: 1.705–1.81; MatWeb: 1.588–1.683; Polymer handbook: 1.671–1.773 |
| Thermal conductivity (W/mK) | CAMPUS Plastics: 0.233–0.242; MatWeb: 0.198–0.203; Polymer handbook: 0.223–0.23 |
Ranges are representative values from the cited handbooks/datasheets; use manufacturer datasheets for design allowables.
Typical uses
- injection molding
- extrusion
- Films
- packaging
Frequently asked questions
What is the density of Techno-UMG-Excelloy-PC-ABS (Dry-as-molded)?
The density of Techno-UMG-Excelloy-PC-ABS (Dry-as-molded) is 1.043 g/cm3.
What is Techno-UMG-Excelloy-PC-ABS (Dry-as-molded) used for?
Techno-UMG-Excelloy-PC-ABS (Dry-as-molded) is typically used for injection molding, extrusion, Films and packaging.
What condition does Techno-UMG-Excelloy-PC-ABS-DRY refer to?
Techno-UMG-Excelloy-PC-ABS-DRY refers to the "Dry-as-molded" condition: Dry-as-molded representative condition.
What category of material is Techno-UMG-Excelloy-PC-ABS (Dry-as-molded)?
Techno-UMG-Excelloy-PC-ABS (Dry-as-molded) is categorized as polymer (family: commodity polymer grade).
Internal tools
Related materials
- Chemours-Teflon-ETFE-200 (Conditioned)
- Chemours-Teflon-ETFE-200 (Dry-as-molded)
- Chemours-Teflon-ETFE-EP-541 (Conditioned)
- Chemours-Teflon-ETFE-EP-541 (Dry-as-molded)
- Chemours-Teflon-ETFE-LM-740AP (Conditioned)
- Chemours-Teflon-ETFE-LM-740AP (Dry-as-molded)
- Ensinger-TECAFORM-AH-CF-PEEK (Conditioned)
- Ensinger-TECAFORM-AH-CF-PEEK (Dry-as-molded)
References
- Polymer Data Handbook / CAMPUS-style datasheet references (Polymer handbook)
- Polycarbonate — PubChem compound entry (PubChem (NCBI))
- Acrylonitrile butadiene styrene — PubChem compound entry (PubChem (NCBI))
- Polymer Data Handbook / CAMPUS-style datasheet references