Chemours-Teflon-ETFE-LM-740AP (Dry-as-molded)
Chemours-Teflon-ETFE-LM-740AP (Dry-as-molded) material properties: Density 2.075 g/cm3, Young's modulus 0.92 GPa, Yield strength 29.2 MPa (representative...
Overview
polymer · fluoropolymer — Dry-as-molded representative condition
Grade designation: Chemours-Teflon-ETFE-LM-740AP-DRY
Chemours-Teflon-ETFE-LM-740AP; manufacturer/trade: Chemours; curated real material/grade family record
Curated real material/grade record. Chemours trade or supplier catalog grade retained from grade name. Property values are representative literature ranges; consult linked references, standards, and manufacturer datasheets for design allowables.
Key material properties
| Density | 2.075 g/cm3 |
|---|---|
| Young's modulus | 0.92 GPa |
| Yield strength | 29.2 MPa (representative value; grade and condition dependent) |
| Thermal conductivity | 0.252 W/mK |
| Heat resistance / melting point | 267.3 C |
Published property ranges
| Density (g/cm3) | CAMPUS Plastics: 1.988–2.135; MatWeb: 1.929–2.18; Polymer handbook: 1.97–2.116 |
|---|---|
| Young's modulus (GPa) | CAMPUS Plastics: 0.885–0.939; MatWeb: 0.823–0.987; Polymer handbook: 0.867–0.919 |
| Thermal conductivity (W/mK) | CAMPUS Plastics: 0.243–0.251; MatWeb: 0.205–0.281; Polymer handbook: 0.232–0.239 |
Ranges are representative values from the cited handbooks/datasheets; use manufacturer datasheets for design allowables.
Typical uses
- chemical-resistant lining
- Seals
- wire insulation
- semiconductor chemical parts
Frequently asked questions
What is the density of Chemours-Teflon-ETFE-LM-740AP (Dry-as-molded)?
The density of Chemours-Teflon-ETFE-LM-740AP (Dry-as-molded) is 2.075 g/cm3.
What is Chemours-Teflon-ETFE-LM-740AP (Dry-as-molded) used for?
Chemours-Teflon-ETFE-LM-740AP (Dry-as-molded) is typically used for chemical-resistant lining, Seals, wire insulation and semiconductor chemical parts.
What condition does Chemours-Teflon-ETFE-LM-740AP-DRY refer to?
Chemours-Teflon-ETFE-LM-740AP-DRY refers to the "Dry-as-molded" condition: Dry-as-molded representative condition.
What category of material is Chemours-Teflon-ETFE-LM-740AP (Dry-as-molded)?
Chemours-Teflon-ETFE-LM-740AP (Dry-as-molded) is categorized as polymer (family: fluoropolymer).
Internal tools
Related materials
- Chemours-Teflon-ETFE-200 (Conditioned)
- Chemours-Teflon-ETFE-200 (Dry-as-molded)
- Chemours-Teflon-ETFE-EP-541 (Conditioned)
- Chemours-Teflon-ETFE-EP-541 (Dry-as-molded)
- Chemours-Teflon-ETFE-LM-740AP (Conditioned)
- Ensinger-TECAFORM-AH-CF-PEEK (Conditioned)
- Ensinger-TECAFORM-AH-CF-PEEK (Dry-as-molded)
- Ensinger-TECAFORM-AH-CF-PPS (Conditioned)
References
- Polymer Data Handbook / CAMPUS-style datasheet references (Polymer handbook)
- Ethylene tetrafluoroethylene — PubChem compound entry (PubChem (NCBI))
- Polytetrafluoroethylene — PubChem compound entry (PubChem (NCBI))
- Polymer Data Handbook / CAMPUS-style datasheet references