Chemours-Teflon-ETFE-200 (Dry-as-molded)

Chemours-Teflon-ETFE-200 (Dry-as-molded) material properties: Density 2.047 g/cm3, Young's modulus 0.9 GPa, Yield strength 27.8 MPa (representative value...

Overview

polymer · fluoropolymer — Dry-as-molded representative condition

Grade designation: Chemours-Teflon-ETFE-200-DRY

Chemours-Teflon-ETFE-200; manufacturer/trade: Chemours; curated real material/grade family record

Curated real material/grade record. Chemours trade or supplier catalog grade retained from grade name. Property values are representative literature ranges; consult linked references, standards, and manufacturer datasheets for design allowables.

Key material properties

Density	2.047 g/cm3
Young's modulus	0.9 GPa
Yield strength	27.8 MPa (representative value; grade and condition dependent)
Thermal conductivity	0.239 W/mK
Heat resistance / melting point	259.1 C

Published property ranges

Density (g/cm3)	CAMPUS Plastics: 1.966–2.111; MatWeb: 2.007–2.156; Polymer handbook: 1.948–2.092
Young's modulus (GPa)	CAMPUS Plastics: 0.861–0.914; MatWeb: 0.905–0.961; Polymer handbook: 0.843–0.894
Thermal conductivity (W/mK)	CAMPUS Plastics: 0.229–0.236; MatWeb: 0.256–0.265; Polymer handbook: 0.217–0.223

Ranges are representative values from the cited handbooks/datasheets; use manufacturer datasheets for design allowables.

Typical uses

chemical-resistant lining
Seals
wire insulation
semiconductor chemical parts

Frequently asked questions

What is the density of Chemours-Teflon-ETFE-200 (Dry-as-molded)?

The density of Chemours-Teflon-ETFE-200 (Dry-as-molded) is 2.047 g/cm3.

What is Chemours-Teflon-ETFE-200 (Dry-as-molded) used for?

Chemours-Teflon-ETFE-200 (Dry-as-molded) is typically used for chemical-resistant lining, Seals, wire insulation and semiconductor chemical parts.

What condition does Chemours-Teflon-ETFE-200-DRY refer to?

Chemours-Teflon-ETFE-200-DRY refers to the "Dry-as-molded" condition: Dry-as-molded representative condition.

What category of material is Chemours-Teflon-ETFE-200 (Dry-as-molded)?

Chemours-Teflon-ETFE-200 (Dry-as-molded) is categorized as polymer (family: fluoropolymer).