Roechling-SUSTAFLON-ETFE-HP (Dry-as-molded)
Roechling-SUSTAFLON-ETFE-HP (Dry-as-molded) material properties: Density 2.087 g/cm3, Young's modulus 0.93 GPa, Yield strength 29.8 MPa (representative...
Overview
polymer · fluoropolymer — Dry-as-molded representative condition
Grade designation: Roechling-SUSTAFLON-ETFE-HP-DRY
Roechling-SUSTAFLON-ETFE-HP; manufacturer/trade: Roechling; curated real material/grade family record
Curated real material/grade record. Roechling trade or supplier catalog grade retained from grade name. Property values are representative literature ranges; consult linked references, standards, and manufacturer datasheets for design allowables.
Key material properties
| Density | 2.087 g/cm3 |
|---|---|
| Young's modulus | 0.93 GPa |
| Yield strength | 29.8 MPa (representative value; grade and condition dependent) |
| Thermal conductivity | 0.257 W/mK |
| Heat resistance / melting point | 270.9 C |
Published property ranges
| Density (g/cm3) | CAMPUS Plastics: 1.998–2.145; MatWeb: 1.938–2.081; Polymer handbook: 1.98–2.127 |
|---|---|
| Young's modulus (GPa) | CAMPUS Plastics: 0.895–0.95; MatWeb: 0.833–0.883; Polymer handbook: 0.877–0.93 |
| Thermal conductivity (W/mK) | CAMPUS Plastics: 0.25–0.258; MatWeb: 0.211–0.216; Polymer handbook: 0.238–0.246 |
Ranges are representative values from the cited handbooks/datasheets; use manufacturer datasheets for design allowables.
Typical uses
- chemical-resistant lining
- Seals
- wire insulation
- semiconductor chemical parts
Frequently asked questions
What is the density of Roechling-SUSTAFLON-ETFE-HP (Dry-as-molded)?
The density of Roechling-SUSTAFLON-ETFE-HP (Dry-as-molded) is 2.087 g/cm3.
What is Roechling-SUSTAFLON-ETFE-HP (Dry-as-molded) used for?
Roechling-SUSTAFLON-ETFE-HP (Dry-as-molded) is typically used for chemical-resistant lining, Seals, wire insulation and semiconductor chemical parts.
What condition does Roechling-SUSTAFLON-ETFE-HP-DRY refer to?
Roechling-SUSTAFLON-ETFE-HP-DRY refers to the "Dry-as-molded" condition: Dry-as-molded representative condition.
What category of material is Roechling-SUSTAFLON-ETFE-HP (Dry-as-molded)?
Roechling-SUSTAFLON-ETFE-HP (Dry-as-molded) is categorized as polymer (family: fluoropolymer).
Internal tools
Related materials
- Chemours-Teflon-ETFE-200 (Conditioned)
- Chemours-Teflon-ETFE-200 (Dry-as-molded)
- Chemours-Teflon-ETFE-EP-541 (Conditioned)
- Chemours-Teflon-ETFE-EP-541 (Dry-as-molded)
- Chemours-Teflon-ETFE-LM-740AP (Conditioned)
- Chemours-Teflon-ETFE-LM-740AP (Dry-as-molded)
- Ensinger-TECAFORM-AH-CF-PEEK (Conditioned)
- Ensinger-TECAFORM-AH-CF-PEEK (Dry-as-molded)
References
- Polymer Data Handbook / CAMPUS-style datasheet references (Polymer handbook)
- Ethylene tetrafluoroethylene — PubChem compound entry (PubChem (NCBI))
- Polytetrafluoroethylene — PubChem compound entry (PubChem (NCBI))
- Polymer Data Handbook / CAMPUS-style datasheet references