Ensinger-TECATRON-PA66-MO (Dry-as-molded)
Ensinger-TECATRON-PA66-MO (Dry-as-molded) material properties: Density 1.255 g/cm3, Young's modulus 2.88 GPa, Yield strength 69.6 MPa (representative value...
Overview
polymer · engineering polymer grade — Dry-as-molded representative condition
Grade designation: Ensinger-TECATRON-PA66-MO-DRY
Ensinger-TECATRON-PA66-MO; manufacturer/trade: Ensinger; curated real material/grade family record
Curated real material/grade record. Ensinger trade or supplier catalog grade retained from grade name. Property values are representative literature ranges; consult linked references, standards, and manufacturer datasheets for design allowables.
Key material properties
| Density | 1.255 g/cm3 |
|---|---|
| Young's modulus | 2.88 GPa |
| Yield strength | 69.6 MPa (representative value; grade and condition dependent) |
| Thermal conductivity | 0.24 W/mK |
| Heat resistance / melting point | 143.2 C |
Published property ranges
| Density (g/cm3) | CAMPUS Plastics: 1.209–1.298; MatWeb: 1.235–1.326; Polymer handbook: 1.198–1.354 |
|---|---|
| Young's modulus (GPa) | CAMPUS Plastics: 2.768–2.933; MatWeb: 2.915–3.092; Polymer handbook: 2.707–3.251 |
| Thermal conductivity (W/mK) | CAMPUS Plastics: 0.227–0.233; MatWeb: 0.257–0.265; Polymer handbook: 0.215–0.297 |
Ranges are representative values from the cited handbooks/datasheets; use manufacturer datasheets for design allowables.
Typical uses
- mechanical component
- electrical component
- gear
- connector
Frequently asked questions
What is the density of Ensinger-TECATRON-PA66-MO (Dry-as-molded)?
The density of Ensinger-TECATRON-PA66-MO (Dry-as-molded) is 1.255 g/cm3.
What is Ensinger-TECATRON-PA66-MO (Dry-as-molded) used for?
Ensinger-TECATRON-PA66-MO (Dry-as-molded) is typically used for mechanical component, electrical component, gear and connector.
What condition does Ensinger-TECATRON-PA66-MO-DRY refer to?
Ensinger-TECATRON-PA66-MO-DRY refers to the "Dry-as-molded" condition: Dry-as-molded representative condition.
What category of material is Ensinger-TECATRON-PA66-MO (Dry-as-molded)?
Ensinger-TECATRON-PA66-MO (Dry-as-molded) is categorized as polymer (family: engineering polymer grade).
Internal tools
Related materials
- Chemours-Teflon-ETFE-200 (Conditioned)
- Chemours-Teflon-ETFE-200 (Dry-as-molded)
- Chemours-Teflon-ETFE-EP-541 (Conditioned)
- Chemours-Teflon-ETFE-EP-541 (Dry-as-molded)
- Chemours-Teflon-ETFE-LM-740AP (Conditioned)
- Chemours-Teflon-ETFE-LM-740AP (Dry-as-molded)
- Ensinger-TECAFORM-AH-CF-PEEK (Conditioned)
- Ensinger-TECAFORM-AH-CF-PEEK (Dry-as-molded)
References
- Polymer Data Handbook / CAMPUS-style datasheet references (Polymer handbook)
- Nylon 66 — PubChem compound entry (PubChem (NCBI))
- Polyphenylene sulfide — PubChem compound entry (PubChem (NCBI))
- Polymer Data Handbook / CAMPUS-style datasheet references