Ensinger-TECAFORM-AH-PPS-GF40 (Conditioned)
Ensinger-TECAFORM-AH-PPS-GF40 (Conditioned) material properties: Density 1.257 g/cm3, Young's modulus 2.89 GPa, Yield strength 70.1 MPa (representative...
Overview
polymer · engineering polymer grade — Conditioned representative condition
Grade designation: Ensinger-TECAFORM-AH-PPS-GF40-COND
Ensinger-TECAFORM-AH-PPS-GF40; manufacturer/trade: Ensinger; curated real material/grade family record
Curated real material/grade record. Ensinger trade or supplier catalog grade retained from grade name. Property values are representative literature ranges; consult linked references, standards, and manufacturer datasheets for design allowables.
Key material properties
| Density | 1.257 g/cm3 |
|---|---|
| Young's modulus | 2.89 GPa |
| Yield strength | 70.1 MPa (representative value; grade and condition dependent) |
| Thermal conductivity | 0.241 W/mK |
| Heat resistance / melting point | 143.7 C |
Published property ranges
| Density (g/cm3) | CAMPUS Plastics: 1.21–1.3; MatWeb: 1.236–1.328; Polymer handbook: 1.2–1.356 |
|---|---|
| Young's modulus (GPa) | CAMPUS Plastics: 2.776–2.942; MatWeb: 2.923–3.101; Polymer handbook: 2.716–3.26 |
| Thermal conductivity (W/mK) | CAMPUS Plastics: 0.229–0.234; MatWeb: 0.258–0.267; Polymer handbook: 0.216–0.299 |
Ranges are representative values from the cited handbooks/datasheets; use manufacturer datasheets for design allowables.
Typical uses
- mechanical component
- electrical component
- gear
- connector
Frequently asked questions
What is the density of Ensinger-TECAFORM-AH-PPS-GF40 (Conditioned)?
The density of Ensinger-TECAFORM-AH-PPS-GF40 (Conditioned) is 1.257 g/cm3.
What is Ensinger-TECAFORM-AH-PPS-GF40 (Conditioned) used for?
Ensinger-TECAFORM-AH-PPS-GF40 (Conditioned) is typically used for mechanical component, electrical component, gear and connector.
What condition does Ensinger-TECAFORM-AH-PPS-GF40-COND refer to?
Ensinger-TECAFORM-AH-PPS-GF40-COND refers to the "Conditioned" condition: Conditioned representative condition.
What category of material is Ensinger-TECAFORM-AH-PPS-GF40 (Conditioned)?
Ensinger-TECAFORM-AH-PPS-GF40 (Conditioned) is categorized as polymer (family: engineering polymer grade).
Internal tools
Related materials
- Chemours-Teflon-ETFE-200 (Conditioned)
- Chemours-Teflon-ETFE-200 (Dry-as-molded)
- Chemours-Teflon-ETFE-EP-541 (Conditioned)
- Chemours-Teflon-ETFE-EP-541 (Dry-as-molded)
- Chemours-Teflon-ETFE-LM-740AP (Conditioned)
- Chemours-Teflon-ETFE-LM-740AP (Dry-as-molded)
- Ensinger-TECAFORM-AH-CF-PEEK (Conditioned)
- Ensinger-TECAFORM-AH-CF-PEEK (Dry-as-molded)
References
- Polymer Data Handbook / CAMPUS-style datasheet references (Polymer handbook)
- Polyphenylene sulfide — PubChem compound entry (PubChem (NCBI))
- Polyoxymethylene — Wikipedia (Wikipedia)
- Polymer Data Handbook / CAMPUS-style datasheet references