BASF-Ultramid-A3EG3 (Conditioned)
BASF-Ultramid-A3EG3 (Conditioned) material properties: Density 1.313 g/cm3, Young's modulus 3.15 GPa, Yield strength 82 MPa (representative value; grade and...
Overview
polymer · engineering polymer grade — Conditioned representative condition
Grade designation: BASF-Ultramid-A3EG3-COND
BASF-Ultramid-A3EG3; manufacturer/trade: BASF; curated real material/grade family record
Curated real material/grade record. BASF trade or supplier catalog grade retained from grade name. Property values are representative literature ranges; consult linked references, standards, and manufacturer datasheets for design allowables.
Key material properties
| Density | 1.313 g/cm3 |
|---|---|
| Young's modulus | 3.15 GPa |
| Yield strength | 82 MPa (representative value; grade and condition dependent) |
| Thermal conductivity | 0.287 W/mK |
| Heat resistance / melting point | 158.9 C |
Published property ranges
| Density (g/cm3) | CAMPUS Plastics: 1.255–1.348; MatWeb: 1.218–1.308; Polymer handbook: 1.244–1.336 |
|---|---|
| Young's modulus (GPa) | CAMPUS Plastics: 3.027–3.214; MatWeb: 2.82–2.989; Polymer handbook: 2.966–3.148 |
| Thermal conductivity (W/mK) | CAMPUS Plastics: 0.279–0.289; MatWeb: 0.237–0.244; Polymer handbook: 0.267–0.276 |
Ranges are representative values from the cited handbooks/datasheets; use manufacturer datasheets for design allowables.
Typical uses
- mechanical component
- electrical component
- gear
- connector
Frequently asked questions
What is the density of BASF-Ultramid-A3EG3 (Conditioned)?
The density of BASF-Ultramid-A3EG3 (Conditioned) is 1.313 g/cm3.
What is BASF-Ultramid-A3EG3 (Conditioned) used for?
BASF-Ultramid-A3EG3 (Conditioned) is typically used for mechanical component, electrical component, gear and connector.
What condition does BASF-Ultramid-A3EG3-COND refer to?
BASF-Ultramid-A3EG3-COND refers to the "Conditioned" condition: Conditioned representative condition.
What category of material is BASF-Ultramid-A3EG3 (Conditioned)?
BASF-Ultramid-A3EG3 (Conditioned) is categorized as polymer (family: engineering polymer grade).
Internal tools
Related materials
- Chemours-Teflon-ETFE-200 (Conditioned)
- Chemours-Teflon-ETFE-200 (Dry-as-molded)
- Chemours-Teflon-ETFE-EP-541 (Conditioned)
- Chemours-Teflon-ETFE-EP-541 (Dry-as-molded)
- Chemours-Teflon-ETFE-LM-740AP (Conditioned)
- Chemours-Teflon-ETFE-LM-740AP (Dry-as-molded)
- Ensinger-TECAFORM-AH-CF-PEEK (Conditioned)
- Ensinger-TECAFORM-AH-CF-PEEK (Dry-as-molded)
References
- Polymer Data Handbook / CAMPUS-style datasheet references (Polymer handbook)
- Nylon 66 — PubChem compound entry (PubChem (NCBI))
- Polymer Data Handbook / CAMPUS-style datasheet references