BASF-Ultramid-70G43L (Conditioned)

BASF-Ultramid-70G43L (Conditioned) material properties: Density 1.305 g/cm3, Young's modulus 3.12 GPa, Yield strength 80.4 MPa (representative value; grade...

Overview

polymer · engineering polymer grade — Conditioned representative condition

Grade designation: BASF-Ultramid-70G43L-COND

BASF-Ultramid-70G43L; manufacturer/trade: BASF; curated real material/grade family record

Curated real material/grade record. BASF trade or supplier catalog grade retained from grade name. Property values are representative literature ranges; consult linked references, standards, and manufacturer datasheets for design allowables.

Key material properties

Density	1.305 g/cm3
Young's modulus	3.12 GPa
Yield strength	80.4 MPa (representative value; grade and condition dependent)
Thermal conductivity	0.28 W/mK
Heat resistance / melting point	156.8 C

Published property ranges

Density (g/cm3)	CAMPUS Plastics: 1.249–1.341; MatWeb: 1.212–1.301; Polymer handbook: 1.238–1.33
Young's modulus (GPa)	CAMPUS Plastics: 2.992–3.176; MatWeb: 2.785–2.952; Polymer handbook: 2.932–3.111
Thermal conductivity (W/mK)	CAMPUS Plastics: 0.272–0.282; MatWeb: 0.23–0.236; Polymer handbook: 0.26–0.269

Ranges are representative values from the cited handbooks/datasheets; use manufacturer datasheets for design allowables.

Typical uses

mechanical component
electrical component
gear
connector

Frequently asked questions

What is the density of BASF-Ultramid-70G43L (Conditioned)?

The density of BASF-Ultramid-70G43L (Conditioned) is 1.305 g/cm3.

What is BASF-Ultramid-70G43L (Conditioned) used for?

BASF-Ultramid-70G43L (Conditioned) is typically used for mechanical component, electrical component, gear and connector.

What condition does BASF-Ultramid-70G43L-COND refer to?

BASF-Ultramid-70G43L-COND refers to the "Conditioned" condition: Conditioned representative condition.

What category of material is BASF-Ultramid-70G43L (Conditioned)?

BASF-Ultramid-70G43L (Conditioned) is categorized as polymer (family: engineering polymer grade).