BASF-Ultramid-70G30HSLR (Conditioned)

BASF-Ultramid-70G30HSLR (Conditioned) material properties: Density 1.267 g/cm3, Young's modulus 2.94 GPa, Yield strength 72.1 MPa (representative value...

Overview

polymer · engineering polymer grade — Conditioned representative condition

Grade designation: BASF-Ultramid-70G30HSLR-COND

BASF-Ultramid-70G30HSLR; manufacturer/trade: BASF; curated real material/grade family record

Curated real material/grade record. BASF trade or supplier catalog grade retained from grade name. Property values are representative literature ranges; consult linked references, standards, and manufacturer datasheets for design allowables.

Key material properties

Density	1.267 g/cm3
Young's modulus	2.94 GPa
Yield strength	72.1 MPa (representative value; grade and condition dependent)
Thermal conductivity	0.249 W/mK
Heat resistance / melting point	146.3 C

Published property ranges

Density (g/cm3)	CAMPUS Plastics: 1.218–1.308; MatWeb: 1.244–1.336; Polymer handbook: 1.207–1.364
Young's modulus (GPa)	CAMPUS Plastics: 2.82–2.989; MatWeb: 2.966–3.148; Polymer handbook: 2.759–3.307
Thermal conductivity (W/mK)	CAMPUS Plastics: 0.237–0.244; MatWeb: 0.267–0.276; Polymer handbook: 0.225–0.308

Ranges are representative values from the cited handbooks/datasheets; use manufacturer datasheets for design allowables.

Typical uses

mechanical component
electrical component
gear
connector

Frequently asked questions

What is the density of BASF-Ultramid-70G30HSLR (Conditioned)?

The density of BASF-Ultramid-70G30HSLR (Conditioned) is 1.267 g/cm3.

What is BASF-Ultramid-70G30HSLR (Conditioned) used for?

BASF-Ultramid-70G30HSLR (Conditioned) is typically used for mechanical component, electrical component, gear and connector.

What condition does BASF-Ultramid-70G30HSLR-COND refer to?

BASF-Ultramid-70G30HSLR-COND refers to the "Conditioned" condition: Conditioned representative condition.

What category of material is BASF-Ultramid-70G30HSLR (Conditioned)?

BASF-Ultramid-70G30HSLR (Conditioned) is categorized as polymer (family: engineering polymer grade).