BASF-Ultramid-101L (Dry-as-molded)
BASF-Ultramid-101L (Dry-as-molded) material properties: Density 1.293 g/cm3, Young's modulus 3.06 GPa, Yield strength 77.9 MPa (representative value; grade...
Overview
polymer · engineering polymer grade — Dry-as-molded representative condition
Grade designation: BASF-Ultramid-101L-DRY
BASF-Ultramid-101L; manufacturer/trade: BASF; curated real material/grade family record
Curated real material/grade record. BASF trade or supplier catalog grade retained from grade name. Property values are representative literature ranges; consult linked references, standards, and manufacturer datasheets for design allowables.
Key material properties
| Density | 1.293 g/cm3 |
|---|---|
| Young's modulus | 3.06 GPa |
| Yield strength | 77.9 MPa (representative value; grade and condition dependent) |
| Thermal conductivity | 0.271 W/mK |
| Heat resistance / melting point | 153.7 C |
Published property ranges
| Density (g/cm3) | CAMPUS Plastics: 1.24–1.331; MatWeb: 1.203–1.359; Polymer handbook: 1.229–1.32 |
|---|---|
| Young's modulus (GPa) | CAMPUS Plastics: 2.94–3.12; MatWeb: 2.733–3.279; Polymer handbook: 2.88–3.054 |
| Thermal conductivity (W/mK) | CAMPUS Plastics: 0.262–0.27; MatWeb: 0.22–0.303; Polymer handbook: 0.25–0.257 |
Ranges are representative values from the cited handbooks/datasheets; use manufacturer datasheets for design allowables.
Typical uses
- mechanical component
- electrical component
- gear
- connector
Frequently asked questions
What is the density of BASF-Ultramid-101L (Dry-as-molded)?
The density of BASF-Ultramid-101L (Dry-as-molded) is 1.293 g/cm3.
What is BASF-Ultramid-101L (Dry-as-molded) used for?
BASF-Ultramid-101L (Dry-as-molded) is typically used for mechanical component, electrical component, gear and connector.
What condition does BASF-Ultramid-101L-DRY refer to?
BASF-Ultramid-101L-DRY refers to the "Dry-as-molded" condition: Dry-as-molded representative condition.
What category of material is BASF-Ultramid-101L (Dry-as-molded)?
BASF-Ultramid-101L (Dry-as-molded) is categorized as polymer (family: engineering polymer grade).
Internal tools
Related materials
- Chemours-Teflon-ETFE-200 (Conditioned)
- Chemours-Teflon-ETFE-200 (Dry-as-molded)
- Chemours-Teflon-ETFE-EP-541 (Conditioned)
- Chemours-Teflon-ETFE-EP-541 (Dry-as-molded)
- Chemours-Teflon-ETFE-LM-740AP (Conditioned)
- Chemours-Teflon-ETFE-LM-740AP (Dry-as-molded)
- Ensinger-TECAFORM-AH-CF-PEEK (Conditioned)
- Ensinger-TECAFORM-AH-CF-PEEK (Dry-as-molded)
References
- Polymer Data Handbook / CAMPUS-style datasheet references (Polymer handbook)
- Nylon 66 — PubChem compound entry (PubChem (NCBI))
- Polymer Data Handbook / CAMPUS-style datasheet references