BASF-Ultradur-T06-200 (Conditioned)

BASF-Ultradur-T06-200 (Conditioned) material properties: Density 1.309 g/cm3, Young's modulus 3.14 GPa, Yield strength 81.2 MPa (representative value; grade...

Overview

polymer · engineering polymer grade — Conditioned representative condition

Grade designation: BASF-Ultradur-T06-200-COND

BASF-Ultradur-T06-200; manufacturer/trade: BASF; curated real material/grade family record

Curated real material/grade record. BASF trade or supplier catalog grade retained from grade name. Property values are representative literature ranges; consult linked references, standards, and manufacturer datasheets for design allowables.

Key material properties

Density	1.309 g/cm3
Young's modulus	3.14 GPa
Yield strength	81.2 MPa (representative value; grade and condition dependent)
Thermal conductivity	0.283 W/mK
Heat resistance / melting point	157.9 C

Published property ranges

Density (g/cm3)	CAMPUS Plastics: 1.252–1.345; MatWeb: 1.215–1.305; Polymer handbook: 1.241–1.333
Young's modulus (GPa)	CAMPUS Plastics: 3.01–3.195; MatWeb: 2.802–2.97; Polymer handbook: 2.949–3.129
Thermal conductivity (W/mK)	CAMPUS Plastics: 0.276–0.286; MatWeb: 0.234–0.24; Polymer handbook: 0.264–0.272

Ranges are representative values from the cited handbooks/datasheets; use manufacturer datasheets for design allowables.

Typical uses

mechanical component
electrical component
gear
connector

Frequently asked questions

What is the density of BASF-Ultradur-T06-200 (Conditioned)?

The density of BASF-Ultradur-T06-200 (Conditioned) is 1.309 g/cm3.

What is BASF-Ultradur-T06-200 (Conditioned) used for?

BASF-Ultradur-T06-200 (Conditioned) is typically used for mechanical component, electrical component, gear and connector.

What condition does BASF-Ultradur-T06-200-COND refer to?

BASF-Ultradur-T06-200-COND refers to the "Conditioned" condition: Conditioned representative condition.

What category of material is BASF-Ultradur-T06-200 (Conditioned)?

BASF-Ultradur-T06-200 (Conditioned) is categorized as polymer (family: engineering polymer grade).