BASF-Ultradur-S620F20 (Conditioned)

BASF-Ultradur-S620F20 (Conditioned) material properties: Density 1.292 g/cm3, Young's modulus 3.05 GPa, Yield strength 77.5 MPa (representative value; grade...

Overview

polymer · engineering polymer grade — Conditioned representative condition

Grade designation: BASF-Ultradur-S620F20-COND

BASF-Ultradur-S620F20; manufacturer/trade: BASF; curated real material/grade family record

Curated real material/grade record. BASF trade or supplier catalog grade retained from grade name. Property values are representative literature ranges; consult linked references, standards, and manufacturer datasheets for design allowables.

Key material properties

Density	1.292 g/cm3
Young's modulus	3.05 GPa
Yield strength	77.5 MPa (representative value; grade and condition dependent)
Thermal conductivity	0.269 W/mK
Heat resistance / melting point	153.1 C

Published property ranges

Density (g/cm3)	CAMPUS Plastics: 1.238–1.33; MatWeb: 1.201–1.358; Polymer handbook: 1.227–1.318
Young's modulus (GPa)	CAMPUS Plastics: 2.932–3.111; MatWeb: 2.724–3.27; Polymer handbook: 2.871–3.045
Thermal conductivity (W/mK)	CAMPUS Plastics: 0.26–0.269; MatWeb: 0.218–0.301; Polymer handbook: 0.248–0.255

Ranges are representative values from the cited handbooks/datasheets; use manufacturer datasheets for design allowables.

Typical uses

mechanical component
electrical component
gear
connector

Frequently asked questions

What is the density of BASF-Ultradur-S620F20 (Conditioned)?

The density of BASF-Ultradur-S620F20 (Conditioned) is 1.292 g/cm3.

What is BASF-Ultradur-S620F20 (Conditioned) used for?

BASF-Ultradur-S620F20 (Conditioned) is typically used for mechanical component, electrical component, gear and connector.

What condition does BASF-Ultradur-S620F20-COND refer to?

BASF-Ultradur-S620F20-COND refers to the "Conditioned" condition: Conditioned representative condition.

What category of material is BASF-Ultradur-S620F20 (Conditioned)?

BASF-Ultradur-S620F20 (Conditioned) is categorized as polymer (family: engineering polymer grade).