BASF-Ultradur-B4450G5 (Conditioned)

BASF-Ultradur-B4450G5 (Conditioned) material properties: Density 1.251 g/cm3, Young's modulus 2.87 GPa, Yield strength 68.8 MPa (representative value; grade...

Overview

polymer · engineering polymer grade — Conditioned representative condition

Grade designation: BASF-Ultradur-B4450G5-COND

BASF-Ultradur-B4450G5; manufacturer/trade: BASF; curated real material/grade family record

Curated real material/grade record. BASF trade or supplier catalog grade retained from grade name. Property values are representative literature ranges; consult linked references, standards, and manufacturer datasheets for design allowables.

Key material properties

Density	1.251 g/cm3
Young's modulus	2.87 GPa
Yield strength	68.8 MPa (representative value; grade and condition dependent)
Thermal conductivity	0.237 W/mK
Heat resistance / melting point	142.1 C

Published property ranges

Density (g/cm3)	CAMPUS Plastics: 1.206–1.363; MatWeb: 1.232–1.323; Polymer handbook: 1.258–1.351
Young's modulus (GPa)	CAMPUS Plastics: 2.75–3.298; MatWeb: 2.897–3.073; Polymer handbook: 3.044–3.232
Thermal conductivity (W/mK)	CAMPUS Plastics: 0.223–0.306; MatWeb: 0.253–0.261; Polymer handbook: 0.283–0.293

Ranges are representative values from the cited handbooks/datasheets; use manufacturer datasheets for design allowables.

Typical uses

mechanical component
electrical component
gear
connector

Frequently asked questions

What is the density of BASF-Ultradur-B4450G5 (Conditioned)?

The density of BASF-Ultradur-B4450G5 (Conditioned) is 1.251 g/cm3.

What is BASF-Ultradur-B4450G5 (Conditioned) used for?

BASF-Ultradur-B4450G5 (Conditioned) is typically used for mechanical component, electrical component, gear and connector.

What condition does BASF-Ultradur-B4450G5-COND refer to?

BASF-Ultradur-B4450G5-COND refers to the "Conditioned" condition: Conditioned representative condition.

What category of material is BASF-Ultradur-B4450G5 (Conditioned)?

BASF-Ultradur-B4450G5 (Conditioned) is categorized as polymer (family: engineering polymer grade).