BASF-Ultradur-B4300G6 (Dry-as-molded)
BASF-Ultradur-B4300G6 (Dry-as-molded) material properties: Density 1.472 g/cm3, Young's modulus 8.76 GPa, Yield strength 137.2 MPa (representative value...
Overview
polymer · filled reinforced polymer — Dry-as-molded representative condition
Grade designation: BASF-Ultradur-B4300G6-DRY
BASF-Ultradur-B4300G6; manufacturer/trade: BASF; curated real material/grade family record
Curated real material/grade record. BASF trade or supplier catalog grade retained from grade name. Property values are representative literature ranges; consult linked references, standards, and manufacturer datasheets for design allowables.
Key material properties
| Density | 1.472 g/cm3 |
|---|---|
| Young's modulus | 8.76 GPa |
| Yield strength | 137.2 MPa (representative value; grade and condition dependent) |
| Thermal conductivity | 0.371 W/mK |
| Heat resistance / melting point | 196.6 C |
Published property ranges
| Density (g/cm3) | CAMPUS Plastics: 1.409–1.514; MatWeb: 1.368–1.546; Polymer handbook: 1.397–1.5 |
|---|---|
| Young's modulus (GPa) | CAMPUS Plastics: 8.405–8.92; MatWeb: 7.817–9.37; Polymer handbook: 8.233–8.734 |
| Thermal conductivity (W/mK) | CAMPUS Plastics: 0.36–0.372; MatWeb: 0.303–0.415; Polymer handbook: 0.343–0.354 |
Ranges are representative values from the cited handbooks/datasheets; use manufacturer datasheets for design allowables.
Typical uses
- structural plastic part
- connector
- bracket
- heat-resistant housing
Frequently asked questions
What is the density of BASF-Ultradur-B4300G6 (Dry-as-molded)?
The density of BASF-Ultradur-B4300G6 (Dry-as-molded) is 1.472 g/cm3.
What is BASF-Ultradur-B4300G6 (Dry-as-molded) used for?
BASF-Ultradur-B4300G6 (Dry-as-molded) is typically used for structural plastic part, connector, bracket and heat-resistant housing.
What condition does BASF-Ultradur-B4300G6-DRY refer to?
BASF-Ultradur-B4300G6-DRY refers to the "Dry-as-molded" condition: Dry-as-molded representative condition.
What category of material is BASF-Ultradur-B4300G6 (Dry-as-molded)?
BASF-Ultradur-B4300G6 (Dry-as-molded) is categorized as polymer (family: filled reinforced polymer).
Internal tools
Related materials
- Chemours-Teflon-ETFE-200 (Conditioned)
- Chemours-Teflon-ETFE-200 (Dry-as-molded)
- Chemours-Teflon-ETFE-EP-541 (Conditioned)
- Chemours-Teflon-ETFE-EP-541 (Dry-as-molded)
- Chemours-Teflon-ETFE-LM-740AP (Conditioned)
- Chemours-Teflon-ETFE-LM-740AP (Dry-as-molded)
- Ensinger-TECAFORM-AH-CF-PEEK (Conditioned)
- Ensinger-TECAFORM-AH-CF-PEEK (Dry-as-molded)
References
- Polymer Data Handbook / CAMPUS-style datasheet references (Polymer handbook)
- Polybutylene terephthalate — PubChem compound entry (PubChem (NCBI))
- Polymer Data Handbook / CAMPUS-style datasheet references