BASF-Ultradur-B4300G10 (Conditioned)

BASF-Ultradur-B4300G10 (Conditioned) material properties: Density 1.441 g/cm3, Young's modulus 8.4 GPa, Yield strength 127.1 MPa (representative value; grade...

Overview

polymer · filled reinforced polymer — Conditioned representative condition

Grade designation: BASF-Ultradur-B4300G10-COND

BASF-Ultradur-B4300G10; manufacturer/trade: BASF; curated real material/grade family record

Curated real material/grade record. BASF trade or supplier catalog grade retained from grade name. Property values are representative literature ranges; consult linked references, standards, and manufacturer datasheets for design allowables.

Key material properties

Density	1.441 g/cm3
Young's modulus	8.4 GPa
Yield strength	127.1 MPa (representative value; grade and condition dependent)
Thermal conductivity	0.342 W/mK
Heat resistance / melting point	187.3 C

Published property ranges

Density (g/cm3)	CAMPUS Plastics: 1.385–1.487; MatWeb: 1.415–1.519; Polymer handbook: 1.373–1.474
Young's modulus (GPa)	CAMPUS Plastics: 8.062–8.548; MatWeb: 8.478–8.999; Polymer handbook: 7.891–8.363
Thermal conductivity (W/mK)	CAMPUS Plastics: 0.327–0.336; MatWeb: 0.367–0.379; Polymer handbook: 0.31–0.318

Ranges are representative values from the cited handbooks/datasheets; use manufacturer datasheets for design allowables.

Typical uses

structural plastic part
connector
bracket
heat-resistant housing

Frequently asked questions

What is the density of BASF-Ultradur-B4300G10 (Conditioned)?

The density of BASF-Ultradur-B4300G10 (Conditioned) is 1.441 g/cm3.

What is BASF-Ultradur-B4300G10 (Conditioned) used for?

BASF-Ultradur-B4300G10 (Conditioned) is typically used for structural plastic part, connector, bracket and heat-resistant housing.

What condition does BASF-Ultradur-B4300G10-COND refer to?

BASF-Ultradur-B4300G10-COND refers to the "Conditioned" condition: Conditioned representative condition.

What category of material is BASF-Ultradur-B4300G10 (Conditioned)?

BASF-Ultradur-B4300G10 (Conditioned) is categorized as polymer (family: filled reinforced polymer).