BASF-Terluran-HI10 (Dry-as-molded)

BASF-Terluran-HI10 (Dry-as-molded) material properties: Density 1.003 g/cm3, Young's modulus 1.64 GPa, Yield strength 30.1 MPa (representative value; grade...

Overview

polymer · commodity polymer grade — Dry-as-molded representative condition

Grade designation: BASF-Terluran-HI10-DRY

BASF-Terluran-HI10; manufacturer/trade: BASF; curated real material/grade family record

Curated real material/grade record. BASF trade or supplier catalog grade retained from grade name. Property values are representative literature ranges; consult linked references, standards, and manufacturer datasheets for design allowables.

Key material properties

Density	1.003 g/cm3
Young's modulus	1.64 GPa
Yield strength	30.1 MPa (representative value; grade and condition dependent)
Thermal conductivity	0.205 W/mK
Heat resistance / melting point	91.3 C

Published property ranges

Density (g/cm3)	CAMPUS Plastics: 0.966–1.037; MatWeb: 0.987–1.059; Polymer handbook: 0.957–1.082
Young's modulus (GPa)	CAMPUS Plastics: 1.578–1.673; MatWeb: 1.661–1.763; Polymer handbook: 1.544–1.853
Thermal conductivity (W/mK)	CAMPUS Plastics: 0.195–0.2; MatWeb: 0.22–0.227; Polymer handbook: 0.185–0.254

Ranges are representative values from the cited handbooks/datasheets; use manufacturer datasheets for design allowables.

Typical uses

injection molding
extrusion
Films
packaging

Frequently asked questions

What is the density of BASF-Terluran-HI10 (Dry-as-molded)?

The density of BASF-Terluran-HI10 (Dry-as-molded) is 1.003 g/cm3.

What is BASF-Terluran-HI10 (Dry-as-molded) used for?

BASF-Terluran-HI10 (Dry-as-molded) is typically used for injection molding, extrusion, Films and packaging.

What condition does BASF-Terluran-HI10-DRY refer to?

BASF-Terluran-HI10-DRY refers to the "Dry-as-molded" condition: Dry-as-molded representative condition.

What category of material is BASF-Terluran-HI10 (Dry-as-molded)?

BASF-Terluran-HI10 (Dry-as-molded) is categorized as polymer (family: commodity polymer grade).