BASF-Luran-S-797S (Dry-as-molded)

BASF-Luran-S-797S (Dry-as-molded) material properties: Density 1.017 g/cm3, Young's modulus 1.69 GPa, Yield strength 31.6 MPa (representative value; grade...

Overview

polymer · commodity polymer grade — Dry-as-molded representative condition

Grade designation: BASF-Luran-S-797S-DRY

BASF-Luran-S-797S; manufacturer/trade: BASF; curated real material/grade family record

Curated real material/grade record. BASF trade or supplier catalog grade retained from grade name. Property values are representative literature ranges; consult linked references, standards, and manufacturer datasheets for design allowables.

Key material properties

Density	1.017 g/cm3
Young's modulus	1.69 GPa
Yield strength	31.6 MPa (representative value; grade and condition dependent)
Thermal conductivity	0.217 W/mK
Heat resistance / melting point	94.3 C

Published property ranges

Density (g/cm3)	CAMPUS Plastics: 0.977–1.049; MatWeb: 0.998–1.071; Polymer handbook: 0.968–1.04
Young's modulus (GPa)	CAMPUS Plastics: 1.622–1.72; MatWeb: 1.705–1.81; Polymer handbook: 1.588–1.683
Thermal conductivity (W/mK)	CAMPUS Plastics: 0.208–0.214; MatWeb: 0.233–0.242; Polymer handbook: 0.198–0.203

Ranges are representative values from the cited handbooks/datasheets; use manufacturer datasheets for design allowables.

Typical uses

injection molding
extrusion
Films
packaging

Frequently asked questions

What is the density of BASF-Luran-S-797S (Dry-as-molded)?

The density of BASF-Luran-S-797S (Dry-as-molded) is 1.017 g/cm3.

What is BASF-Luran-S-797S (Dry-as-molded) used for?

BASF-Luran-S-797S (Dry-as-molded) is typically used for injection molding, extrusion, Films and packaging.

What condition does BASF-Luran-S-797S-DRY refer to?

BASF-Luran-S-797S-DRY refers to the "Dry-as-molded" condition: Dry-as-molded representative condition.

What category of material is BASF-Luran-S-797S (Dry-as-molded)?

BASF-Luran-S-797S (Dry-as-molded) is categorized as polymer (family: commodity polymer grade).