BASF-Luran-S-778T (Dry-as-molded)

BASF-Luran-S-778T (Dry-as-molded) material properties: Density 1.002 g/cm3, Young's modulus 1.64 GPa, Yield strength 29.9 MPa (representative value; grade...

Overview

polymer · commodity polymer grade — Dry-as-molded representative condition

Grade designation: BASF-Luran-S-778T-DRY

BASF-Luran-S-778T; manufacturer/trade: BASF; curated real material/grade family record

Curated real material/grade record. BASF trade or supplier catalog grade retained from grade name. Property values are representative literature ranges; consult linked references, standards, and manufacturer datasheets for design allowables.

Key material properties

Density	1.002 g/cm3
Young's modulus	1.64 GPa
Yield strength	29.9 MPa (representative value; grade and condition dependent)
Thermal conductivity	0.204 W/mK
Heat resistance / melting point	91 C

Published property ranges

Density (g/cm3)	CAMPUS Plastics: 0.965–1.036; MatWeb: 0.985–1.058; Polymer handbook: 0.956–1.081
Young's modulus (GPa)	CAMPUS Plastics: 1.573–1.667; MatWeb: 1.656–1.757; Polymer handbook: 1.539–1.848
Thermal conductivity (W/mK)	CAMPUS Plastics: 0.193–0.198; MatWeb: 0.219–0.226; Polymer handbook: 0.183–0.253

Ranges are representative values from the cited handbooks/datasheets; use manufacturer datasheets for design allowables.

Typical uses

injection molding
extrusion
Films
packaging

Frequently asked questions

What is the density of BASF-Luran-S-778T (Dry-as-molded)?

The density of BASF-Luran-S-778T (Dry-as-molded) is 1.002 g/cm3.

What is BASF-Luran-S-778T (Dry-as-molded) used for?

BASF-Luran-S-778T (Dry-as-molded) is typically used for injection molding, extrusion, Films and packaging.

What condition does BASF-Luran-S-778T-DRY refer to?

BASF-Luran-S-778T-DRY refers to the "Dry-as-molded" condition: Dry-as-molded representative condition.

What category of material is BASF-Luran-S-778T (Dry-as-molded)?

BASF-Luran-S-778T (Dry-as-molded) is categorized as polymer (family: commodity polymer grade).