BASF-Luran-S-778T (Conditioned)

BASF-Luran-S-778T (Conditioned) material properties: Density 1.028 g/cm3, Young's modulus 1.73 GPa, Yield strength 32.9 MPa (representative value; grade and...

Overview

polymer · commodity polymer grade — Conditioned representative condition

Grade designation: BASF-Luran-S-778T-COND

BASF-Luran-S-778T; manufacturer/trade: BASF; curated real material/grade family record

Curated real material/grade record. BASF trade or supplier catalog grade retained from grade name. Property values are representative literature ranges; consult linked references, standards, and manufacturer datasheets for design allowables.

Key material properties

Density	1.028 g/cm3
Young's modulus	1.73 GPa
Yield strength	32.9 MPa (representative value; grade and condition dependent)
Thermal conductivity	0.227 W/mK
Heat resistance / melting point	96.7 C

Published property ranges

Density (g/cm3)	CAMPUS Plastics: 0.985–1.058; MatWeb: 0.956–1.081; Polymer handbook: 0.977–1.049
Young's modulus (GPa)	CAMPUS Plastics: 1.656–1.757; MatWeb: 1.539–1.848; Polymer handbook: 1.622–1.72
Thermal conductivity (W/mK)	CAMPUS Plastics: 0.219–0.226; MatWeb: 0.183–0.253; Polymer handbook: 0.208–0.214

Ranges are representative values from the cited handbooks/datasheets; use manufacturer datasheets for design allowables.

Typical uses

injection molding
extrusion
Films
packaging

Frequently asked questions

What is the density of BASF-Luran-S-778T (Conditioned)?

The density of BASF-Luran-S-778T (Conditioned) is 1.028 g/cm3.

What is BASF-Luran-S-778T (Conditioned) used for?

BASF-Luran-S-778T (Conditioned) is typically used for injection molding, extrusion, Films and packaging.

What condition does BASF-Luran-S-778T-COND refer to?

BASF-Luran-S-778T-COND refers to the "Conditioned" condition: Conditioned representative condition.

What category of material is BASF-Luran-S-778T (Conditioned)?

BASF-Luran-S-778T (Conditioned) is categorized as polymer (family: commodity polymer grade).