BASF-Luran-S-757G (Dry-as-molded)

BASF-Luran-S-757G (Dry-as-molded) material properties: Density 1.049 g/cm3, Young's modulus 1.8 GPa, Yield strength 35.3 MPa (representative value; grade and...

Overview

polymer · commodity polymer grade — Dry-as-molded representative condition

Grade designation: BASF-Luran-S-757G-DRY

BASF-Luran-S-757G; manufacturer/trade: BASF; curated real material/grade family record

Curated real material/grade record. BASF trade or supplier catalog grade retained from grade name. Property values are representative literature ranges; consult linked references, standards, and manufacturer datasheets for design allowables.

Key material properties

Density	1.049 g/cm3
Young's modulus	1.8 GPa
Yield strength	35.3 MPa (representative value; grade and condition dependent)
Thermal conductivity	0.245 W/mK
Heat resistance / melting point	101.3 C

Published property ranges

Density (g/cm3)	CAMPUS Plastics: 1.002–1.077; MatWeb: 0.973–1.045; Polymer handbook: 0.994–1.067
Young's modulus (GPa)	CAMPUS Plastics: 1.725–1.832; MatWeb: 1.608–1.704; Polymer handbook: 1.691–1.795
Thermal conductivity (W/mK)	CAMPUS Plastics: 0.239–0.248; MatWeb: 0.204–0.21; Polymer handbook: 0.229–0.237

Ranges are representative values from the cited handbooks/datasheets; use manufacturer datasheets for design allowables.

Typical uses

injection molding
extrusion
Films
packaging

Frequently asked questions

What is the density of BASF-Luran-S-757G (Dry-as-molded)?

The density of BASF-Luran-S-757G (Dry-as-molded) is 1.049 g/cm3.

What is BASF-Luran-S-757G (Dry-as-molded) used for?

BASF-Luran-S-757G (Dry-as-molded) is typically used for injection molding, extrusion, Films and packaging.

What condition does BASF-Luran-S-757G-DRY refer to?

BASF-Luran-S-757G-DRY refers to the "Dry-as-molded" condition: Dry-as-molded representative condition.

What category of material is BASF-Luran-S-757G (Dry-as-molded)?

BASF-Luran-S-757G (Dry-as-molded) is categorized as polymer (family: commodity polymer grade).