BASF-Elastollan-385E (Dry-as-molded)
BASF-Elastollan-385E (Dry-as-molded) material properties: Density 1.098 g/cm3, Young's modulus 0.08 GPa, Yield strength 17.9 MPa (representative value; grade...
Overview
polymer · thermoplastic elastomer and rubber grade — Dry-as-molded representative condition
Grade designation: BASF-Elastollan-385E-DRY
BASF-Elastollan-385E; manufacturer/trade: BASF; curated real material/grade family record
Curated real material/grade record. BASF trade or supplier catalog grade retained from grade name. Property values are representative literature ranges; consult linked references, standards, and manufacturer datasheets for design allowables.
Key material properties
| Density | 1.098 g/cm3 |
|---|---|
| Young's modulus | 0.08 GPa |
| Yield strength | 17.9 MPa (representative value; grade and condition dependent) |
| Thermal conductivity | 0.199 W/mK |
| Heat resistance / melting point | 124.6 C |
Published property ranges
| Density (g/cm3) | CAMPUS Plastics: 1.055–1.133; MatWeb: 1.077–1.157; Polymer handbook: 1.045–1.123 |
|---|---|
| Young's modulus (GPa) | CAMPUS Plastics: 0.077–0.081; MatWeb: 0.08–0.085; Polymer handbook: 0.075–0.079 |
| Thermal conductivity (W/mK) | CAMPUS Plastics: 0.191–0.196; MatWeb: 0.214–0.221; Polymer handbook: 0.181–0.186 |
Ranges are representative values from the cited handbooks/datasheets; use manufacturer datasheets for design allowables.
Typical uses
- Seals
- hose
- vibration damping
- soft-touch component
Frequently asked questions
What is the density of BASF-Elastollan-385E (Dry-as-molded)?
The density of BASF-Elastollan-385E (Dry-as-molded) is 1.098 g/cm3.
What is BASF-Elastollan-385E (Dry-as-molded) used for?
BASF-Elastollan-385E (Dry-as-molded) is typically used for Seals, hose, vibration damping and soft-touch component.
What condition does BASF-Elastollan-385E-DRY refer to?
BASF-Elastollan-385E-DRY refers to the "Dry-as-molded" condition: Dry-as-molded representative condition.
What category of material is BASF-Elastollan-385E (Dry-as-molded)?
BASF-Elastollan-385E (Dry-as-molded) is categorized as polymer (family: thermoplastic elastomer and rubber grade).
Internal tools
Related materials
- Chemours-Teflon-ETFE-200 (Conditioned)
- Chemours-Teflon-ETFE-200 (Dry-as-molded)
- Chemours-Teflon-ETFE-EP-541 (Conditioned)
- Chemours-Teflon-ETFE-EP-541 (Dry-as-molded)
- Chemours-Teflon-ETFE-LM-740AP (Conditioned)
- Chemours-Teflon-ETFE-LM-740AP (Dry-as-molded)
- Ensinger-TECAFORM-AH-CF-PEEK (Conditioned)
- Ensinger-TECAFORM-AH-CF-PEEK (Dry-as-molded)
References
- Polymer Data Handbook / CAMPUS-style datasheet references (Polymer handbook)
- Polyurethane — PubChem compound entry (PubChem (NCBI))
- Polymer Data Handbook / CAMPUS-style datasheet references