BASF-Elastollan-1185A (Dry-as-molded)
BASF-Elastollan-1185A (Dry-as-molded) material properties: Density 1.082 g/cm3, Young's modulus 0.08 GPa, Yield strength 16.9 MPa (representative value...
Overview
polymer · thermoplastic elastomer and rubber grade — Dry-as-molded representative condition
Grade designation: BASF-Elastollan-1185A-DRY
BASF-Elastollan-1185A; manufacturer/trade: BASF; curated real material/grade family record
Curated real material/grade record. BASF trade or supplier catalog grade retained from grade name. Property values are representative literature ranges; consult linked references, standards, and manufacturer datasheets for design allowables.
Key material properties
| Density | 1.082 g/cm3 |
|---|---|
| Young's modulus | 0.08 GPa |
| Yield strength | 16.9 MPa (representative value; grade and condition dependent) |
| Thermal conductivity | 0.187 W/mK |
| Heat resistance / melting point | 120.2 C |
Published property ranges
| Density (g/cm3) | CAMPUS Plastics: 1.041–1.118; MatWeb: 1.064–1.143; Polymer handbook: 1.032–1.167 |
|---|---|
| Young's modulus (GPa) | CAMPUS Plastics: 0.074–0.079; MatWeb: 0.078–0.083; Polymer handbook: 0.073–0.087 |
| Thermal conductivity (W/mK) | CAMPUS Plastics: 0.177–0.182; MatWeb: 0.2–0.207; Polymer handbook: 0.168–0.231 |
Ranges are representative values from the cited handbooks/datasheets; use manufacturer datasheets for design allowables.
Typical uses
- Seals
- hose
- vibration damping
- soft-touch component
Frequently asked questions
What is the density of BASF-Elastollan-1185A (Dry-as-molded)?
The density of BASF-Elastollan-1185A (Dry-as-molded) is 1.082 g/cm3.
What is BASF-Elastollan-1185A (Dry-as-molded) used for?
BASF-Elastollan-1185A (Dry-as-molded) is typically used for Seals, hose, vibration damping and soft-touch component.
What condition does BASF-Elastollan-1185A-DRY refer to?
BASF-Elastollan-1185A-DRY refers to the "Dry-as-molded" condition: Dry-as-molded representative condition.
What category of material is BASF-Elastollan-1185A (Dry-as-molded)?
BASF-Elastollan-1185A (Dry-as-molded) is categorized as polymer (family: thermoplastic elastomer and rubber grade).
Internal tools
Related materials
- Chemours-Teflon-ETFE-200 (Conditioned)
- Chemours-Teflon-ETFE-200 (Dry-as-molded)
- Chemours-Teflon-ETFE-EP-541 (Conditioned)
- Chemours-Teflon-ETFE-EP-541 (Dry-as-molded)
- Chemours-Teflon-ETFE-LM-740AP (Conditioned)
- Chemours-Teflon-ETFE-LM-740AP (Dry-as-molded)
- Ensinger-TECAFORM-AH-CF-PEEK (Conditioned)
- Ensinger-TECAFORM-AH-CF-PEEK (Dry-as-molded)
References
- Polymer Data Handbook / CAMPUS-style datasheet references (Polymer handbook)
- Polyurethane — PubChem compound entry (PubChem (NCBI))
- Polymer Data Handbook / CAMPUS-style datasheet references