Avient-Stat-Tech-PPS-GF40 (Dry-as-molded)
Avient-Stat-Tech-PPS-GF40 (Dry-as-molded) material properties: Density 1.435 g/cm3, Young's modulus 8.32 GPa, Yield strength 125 MPa (representative value...
Overview
polymer · filled reinforced polymer — Dry-as-molded representative condition
Grade designation: Avient-Stat-Tech-PPS-GF40-DRY
Avient-Stat-Tech-PPS-GF40; manufacturer/trade: Avient; curated real material/grade family record
Curated real material/grade record. Avient trade or supplier catalog grade retained from grade name. Property values are representative literature ranges; consult linked references, standards, and manufacturer datasheets for design allowables.
Key material properties
| Density | 1.435 g/cm3 |
|---|---|
| Young's modulus | 8.32 GPa |
| Yield strength | 125 MPa (representative value; grade and condition dependent) |
| Thermal conductivity | 0.335 W/mK |
| Heat resistance / melting point | 185.3 C |
Published property ranges
| Density (g/cm3) | CAMPUS Plastics: 1.38–1.482; MatWeb: 1.409–1.514; Polymer handbook: 1.368–1.546 |
|---|---|
| Young's modulus (GPa) | CAMPUS Plastics: 7.989–8.469; MatWeb: 8.405–8.92; Polymer handbook: 7.817–9.37 |
| Thermal conductivity (W/mK) | CAMPUS Plastics: 0.32–0.328; MatWeb: 0.36–0.372; Polymer handbook: 0.303–0.415 |
Ranges are representative values from the cited handbooks/datasheets; use manufacturer datasheets for design allowables.
Typical uses
- structural plastic part
- connector
- bracket
- heat-resistant housing
Frequently asked questions
What is the density of Avient-Stat-Tech-PPS-GF40 (Dry-as-molded)?
The density of Avient-Stat-Tech-PPS-GF40 (Dry-as-molded) is 1.435 g/cm3.
What is Avient-Stat-Tech-PPS-GF40 (Dry-as-molded) used for?
Avient-Stat-Tech-PPS-GF40 (Dry-as-molded) is typically used for structural plastic part, connector, bracket and heat-resistant housing.
What condition does Avient-Stat-Tech-PPS-GF40-DRY refer to?
Avient-Stat-Tech-PPS-GF40-DRY refers to the "Dry-as-molded" condition: Dry-as-molded representative condition.
What category of material is Avient-Stat-Tech-PPS-GF40 (Dry-as-molded)?
Avient-Stat-Tech-PPS-GF40 (Dry-as-molded) is categorized as polymer (family: filled reinforced polymer).
Internal tools
Related materials
- Chemours-Teflon-ETFE-200 (Conditioned)
- Chemours-Teflon-ETFE-200 (Dry-as-molded)
- Chemours-Teflon-ETFE-EP-541 (Conditioned)
- Chemours-Teflon-ETFE-EP-541 (Dry-as-molded)
- Chemours-Teflon-ETFE-LM-740AP (Conditioned)
- Chemours-Teflon-ETFE-LM-740AP (Dry-as-molded)
- Ensinger-TECAFORM-AH-CF-PEEK (Conditioned)
- Ensinger-TECAFORM-AH-CF-PEEK (Dry-as-molded)
References
- Polymer Data Handbook / CAMPUS-style datasheet references (Polymer handbook)
- Polyphenylene sulfide — PubChem compound entry (PubChem (NCBI))
- Polymer Data Handbook / CAMPUS-style datasheet references