Avient-OnForce-LFT-PEEK-CF30 (Dry-as-molded)
Avient-OnForce-LFT-PEEK-CF30 (Dry-as-molded) material properties: Density 1.426 g/cm3, Young's modulus 8.22 GPa, Yield strength 122.1 MPa (representative...
Overview
polymer · filled reinforced polymer — Dry-as-molded representative condition
Grade designation: Avient-OnForce-LFT-PEEK-CF30-DRY
Avient-OnForce-LFT-PEEK-CF30; manufacturer/trade: Avient; curated real material/grade family record
Curated real material/grade record. Avient trade or supplier catalog grade retained from grade name. Property values are representative literature ranges; consult linked references, standards, and manufacturer datasheets for design allowables.
Key material properties
| Density | 1.426 g/cm3 |
|---|---|
| Young's modulus | 8.22 GPa |
| Yield strength | 122.1 MPa (representative value; grade and condition dependent) |
| Thermal conductivity | 0.327 W/mK |
| Heat resistance / melting point | 182.7 C |
Published property ranges
| Density (g/cm3) | CAMPUS Plastics: 1.373–1.474; MatWeb: 1.402–1.506; Polymer handbook: 1.361–1.538 |
|---|---|
| Young's modulus (GPa) | CAMPUS Plastics: 7.891–8.363; MatWeb: 8.307–8.813; Polymer handbook: 7.719–9.264 |
| Thermal conductivity (W/mK) | CAMPUS Plastics: 0.31–0.318; MatWeb: 0.35–0.361; Polymer handbook: 0.294–0.405 |
Ranges are representative values from the cited handbooks/datasheets; use manufacturer datasheets for design allowables.
Typical uses
- structural plastic part
- connector
- bracket
- heat-resistant housing
Frequently asked questions
What is the density of Avient-OnForce-LFT-PEEK-CF30 (Dry-as-molded)?
The density of Avient-OnForce-LFT-PEEK-CF30 (Dry-as-molded) is 1.426 g/cm3.
What is Avient-OnForce-LFT-PEEK-CF30 (Dry-as-molded) used for?
Avient-OnForce-LFT-PEEK-CF30 (Dry-as-molded) is typically used for structural plastic part, connector, bracket and heat-resistant housing.
What condition does Avient-OnForce-LFT-PEEK-CF30-DRY refer to?
Avient-OnForce-LFT-PEEK-CF30-DRY refers to the "Dry-as-molded" condition: Dry-as-molded representative condition.
What category of material is Avient-OnForce-LFT-PEEK-CF30 (Dry-as-molded)?
Avient-OnForce-LFT-PEEK-CF30 (Dry-as-molded) is categorized as polymer (family: filled reinforced polymer).
Internal tools
Related materials
- Chemours-Teflon-ETFE-200 (Conditioned)
- Chemours-Teflon-ETFE-200 (Dry-as-molded)
- Chemours-Teflon-ETFE-EP-541 (Conditioned)
- Chemours-Teflon-ETFE-EP-541 (Dry-as-molded)
- Chemours-Teflon-ETFE-LM-740AP (Conditioned)
- Chemours-Teflon-ETFE-LM-740AP (Dry-as-molded)
- Ensinger-TECAFORM-AH-CF-PEEK (Conditioned)
- Ensinger-TECAFORM-AH-CF-PEEK (Dry-as-molded)
References
- Polymer Data Handbook / CAMPUS-style datasheet references (Polymer handbook)
- Polyetheretherketone — PubChem compound entry (PubChem (NCBI))
- Polymer Data Handbook / CAMPUS-style datasheet references