Avient-Edgetek-PA66-GF60 (Conditioned)

Avient-Edgetek-PA66-GF60 (Conditioned) material properties: Density 1.435 g/cm3, Young's modulus 8.32 GPa, Yield strength 125 MPa (representative value...

Overview

polymer · filled reinforced polymer — Conditioned representative condition

Grade designation: Avient-Edgetek-PA66-GF60-COND

Avient-Edgetek-PA66-GF60; manufacturer/trade: Avient; curated real material/grade family record

Curated real material/grade record. Avient trade or supplier catalog grade retained from grade name. Property values are representative literature ranges; consult linked references, standards, and manufacturer datasheets for design allowables.

Key material properties

Density	1.435 g/cm3
Young's modulus	8.32 GPa
Yield strength	125 MPa (representative value; grade and condition dependent)
Thermal conductivity	0.335 W/mK
Heat resistance / melting point	185.3 C

Published property ranges

Density (g/cm3)	CAMPUS Plastics: 1.38–1.482; MatWeb: 1.409–1.514; Polymer handbook: 1.368–1.546
Young's modulus (GPa)	CAMPUS Plastics: 7.989–8.469; MatWeb: 8.405–8.92; Polymer handbook: 7.817–9.37
Thermal conductivity (W/mK)	CAMPUS Plastics: 0.32–0.328; MatWeb: 0.36–0.372; Polymer handbook: 0.303–0.415

Ranges are representative values from the cited handbooks/datasheets; use manufacturer datasheets for design allowables.

Typical uses

structural plastic part
connector
bracket
heat-resistant housing

Frequently asked questions

What is the density of Avient-Edgetek-PA66-GF60 (Conditioned)?

The density of Avient-Edgetek-PA66-GF60 (Conditioned) is 1.435 g/cm3.

What is Avient-Edgetek-PA66-GF60 (Conditioned) used for?

Avient-Edgetek-PA66-GF60 (Conditioned) is typically used for structural plastic part, connector, bracket and heat-resistant housing.

What condition does Avient-Edgetek-PA66-GF60-COND refer to?

Avient-Edgetek-PA66-GF60-COND refers to the "Conditioned" condition: Conditioned representative condition.

What category of material is Avient-Edgetek-PA66-GF60 (Conditioned)?

Avient-Edgetek-PA66-GF60 (Conditioned) is categorized as polymer (family: filled reinforced polymer).