Asahi-Kasei-Leona-F130-C (Dry-as-molded)
Asahi-Kasei-Leona-F130-C (Dry-as-molded) material properties: Density 1.301 g/cm3, Young's modulus 3.1 GPa, Yield strength 79.5 MPa (representative value...
Overview
polymer · engineering polymer grade — Dry-as-molded representative condition
Grade designation: Asahi-Kasei-Leona-F130-C-DRY
Asahi-Kasei-Leona-F130-C; manufacturer/trade: Asahi; curated real material/grade family record
Curated real material/grade record. Asahi trade or supplier catalog grade retained from grade name. Property values are representative literature ranges; consult linked references, standards, and manufacturer datasheets for design allowables.
Key material properties
| Density | 1.301 g/cm3 |
|---|---|
| Young's modulus | 3.1 GPa |
| Yield strength | 79.5 MPa (representative value; grade and condition dependent) |
| Thermal conductivity | 0.277 W/mK |
| Heat resistance / melting point | 155.8 C |
Published property ranges
| Density (g/cm3) | CAMPUS Plastics: 1.246–1.338; MatWeb: 1.209–1.298; Polymer handbook: 1.235–1.326 |
|---|---|
| Young's modulus (GPa) | CAMPUS Plastics: 2.975–3.157; MatWeb: 2.768–2.933; Polymer handbook: 2.915–3.092 |
| Thermal conductivity (W/mK) | CAMPUS Plastics: 0.269–0.278; MatWeb: 0.227–0.233; Polymer handbook: 0.257–0.265 |
Ranges are representative values from the cited handbooks/datasheets; use manufacturer datasheets for design allowables.
Typical uses
- mechanical component
- electrical component
- gear
- connector
Frequently asked questions
What is the density of Asahi-Kasei-Leona-F130-C (Dry-as-molded)?
The density of Asahi-Kasei-Leona-F130-C (Dry-as-molded) is 1.301 g/cm3.
What is Asahi-Kasei-Leona-F130-C (Dry-as-molded) used for?
Asahi-Kasei-Leona-F130-C (Dry-as-molded) is typically used for mechanical component, electrical component, gear and connector.
What condition does Asahi-Kasei-Leona-F130-C-DRY refer to?
Asahi-Kasei-Leona-F130-C-DRY refers to the "Dry-as-molded" condition: Dry-as-molded representative condition.
What category of material is Asahi-Kasei-Leona-F130-C (Dry-as-molded)?
Asahi-Kasei-Leona-F130-C (Dry-as-molded) is categorized as polymer (family: engineering polymer grade).
Internal tools
Related materials
- Chemours-Teflon-ETFE-200 (Conditioned)
- Chemours-Teflon-ETFE-200 (Dry-as-molded)
- Chemours-Teflon-ETFE-EP-541 (Conditioned)
- Chemours-Teflon-ETFE-EP-541 (Dry-as-molded)
- Chemours-Teflon-ETFE-LM-740AP (Conditioned)
- Chemours-Teflon-ETFE-LM-740AP (Dry-as-molded)
- Ensinger-TECAFORM-AH-CF-PEEK (Conditioned)
- Ensinger-TECAFORM-AH-CF-PEEK (Dry-as-molded)
References
- Polymer Data Handbook / CAMPUS-style datasheet references (Polymer handbook)
- Nylon 66 — PubChem compound entry (PubChem (NCBI))
- Polymer Data Handbook / CAMPUS-style datasheet references