Arkema-Kynar-761 (Dry-as-molded)
Arkema-Kynar-761 (Dry-as-molded) material properties: Density 2.096 g/cm3, Young's modulus 0.94 GPa, Yield strength 30.3 MPa (representative value; grade and...
Overview
polymer · fluoropolymer — Dry-as-molded representative condition
Grade designation: Arkema-Kynar-761-DRY
Arkema-Kynar-761; manufacturer/trade: Arkema; curated real material/grade family record
Curated real material/grade record. Arkema trade or supplier catalog grade retained from grade name. Property values are representative literature ranges; consult linked references, standards, and manufacturer datasheets for design allowables.
Key material properties
| Density | 2.096 g/cm3 |
|---|---|
| Young's modulus | 0.94 GPa |
| Yield strength | 30.3 MPa (representative value; grade and condition dependent) |
| Thermal conductivity | 0.262 W/mK |
| Heat resistance / melting point | 273.7 C |
Published property ranges
| Density (g/cm3) | CAMPUS Plastics: 2.005–2.153; MatWeb: 1.946–2.089; Polymer handbook: 1.988–2.135 |
|---|---|
| Young's modulus (GPa) | CAMPUS Plastics: 0.903–0.958; MatWeb: 0.841–0.891; Polymer handbook: 0.885–0.939 |
| Thermal conductivity (W/mK) | CAMPUS Plastics: 0.255–0.264; MatWeb: 0.216–0.222; Polymer handbook: 0.243–0.251 |
Ranges are representative values from the cited handbooks/datasheets; use manufacturer datasheets for design allowables.
Typical uses
- chemical-resistant lining
- Seals
- wire insulation
- semiconductor chemical parts
Frequently asked questions
What is the density of Arkema-Kynar-761 (Dry-as-molded)?
The density of Arkema-Kynar-761 (Dry-as-molded) is 2.096 g/cm3.
What is Arkema-Kynar-761 (Dry-as-molded) used for?
Arkema-Kynar-761 (Dry-as-molded) is typically used for chemical-resistant lining, Seals, wire insulation and semiconductor chemical parts.
What condition does Arkema-Kynar-761-DRY refer to?
Arkema-Kynar-761-DRY refers to the "Dry-as-molded" condition: Dry-as-molded representative condition.
What category of material is Arkema-Kynar-761 (Dry-as-molded)?
Arkema-Kynar-761 (Dry-as-molded) is categorized as polymer (family: fluoropolymer).
Internal tools
Related materials
- Chemours-Teflon-ETFE-200 (Conditioned)
- Chemours-Teflon-ETFE-200 (Dry-as-molded)
- Chemours-Teflon-ETFE-EP-541 (Conditioned)
- Chemours-Teflon-ETFE-EP-541 (Dry-as-molded)
- Chemours-Teflon-ETFE-LM-740AP (Conditioned)
- Chemours-Teflon-ETFE-LM-740AP (Dry-as-molded)
- Ensinger-TECAFORM-AH-CF-PEEK (Conditioned)
- Ensinger-TECAFORM-AH-CF-PEEK (Dry-as-molded)
References
- Polymer Data Handbook / CAMPUS-style datasheet references (Polymer handbook)
- Polyvinylidene fluoride — PubChem compound entry (PubChem (NCBI))
- Polymer Data Handbook / CAMPUS-style datasheet references