Arkema-Kynar-761 (Conditioned)

Arkema-Kynar-761 (Conditioned) material properties: Density 2.022 g/cm3, Young's modulus 0.88 GPa, Yield strength 26.6 MPa (representative value; grade and...

Overview

polymer · fluoropolymer — Conditioned representative condition

Grade designation: Arkema-Kynar-761-COND

Arkema-Kynar-761; manufacturer/trade: Arkema; curated real material/grade family record

Curated real material/grade record. Arkema trade or supplier catalog grade retained from grade name. Property values are representative literature ranges; consult linked references, standards, and manufacturer datasheets for design allowables.

Key material properties

Density	2.022 g/cm3
Young's modulus	0.88 GPa
Yield strength	26.6 MPa (representative value; grade and condition dependent)
Thermal conductivity	0.227 W/mK
Heat resistance / melting point	251.8 C

Published property ranges

Density (g/cm3)	CAMPUS Plastics: 1.946–2.089; MatWeb: 1.988–2.135; Polymer handbook: 1.929–2.18
Young's modulus (GPa)	CAMPUS Plastics: 0.841–0.891; MatWeb: 0.885–0.939; Polymer handbook: 0.823–0.987
Thermal conductivity (W/mK)	CAMPUS Plastics: 0.216–0.222; MatWeb: 0.243–0.251; Polymer handbook: 0.205–0.281

Ranges are representative values from the cited handbooks/datasheets; use manufacturer datasheets for design allowables.

Typical uses

chemical-resistant lining
Seals
wire insulation
semiconductor chemical parts

Frequently asked questions

What is the density of Arkema-Kynar-761 (Conditioned)?

The density of Arkema-Kynar-761 (Conditioned) is 2.022 g/cm3.

What is Arkema-Kynar-761 (Conditioned) used for?

Arkema-Kynar-761 (Conditioned) is typically used for chemical-resistant lining, Seals, wire insulation and semiconductor chemical parts.

What condition does Arkema-Kynar-761-COND refer to?

Arkema-Kynar-761-COND refers to the "Conditioned" condition: Conditioned representative condition.

What category of material is Arkema-Kynar-761 (Conditioned)?

Arkema-Kynar-761 (Conditioned) is categorized as polymer (family: fluoropolymer).