Arkema-Kynar-760 (Conditioned)

Arkema-Kynar-760 (Conditioned) material properties: Density 1.992 g/cm3, Young's modulus 0.85 GPa, Yield strength 25.1 MPa (representative value; grade and...

Overview

polymer · fluoropolymer — Conditioned representative condition

Grade designation: Arkema-Kynar-760-COND

Arkema-Kynar-760; manufacturer/trade: Arkema; curated real material/grade family record

Curated real material/grade record. Arkema trade or supplier catalog grade retained from grade name. Property values are representative literature ranges; consult linked references, standards, and manufacturer datasheets for design allowables.

Key material properties

Density	1.992 g/cm3
Young's modulus	0.85 GPa
Yield strength	25.1 MPa (representative value; grade and condition dependent)
Thermal conductivity	0.213 W/mK
Heat resistance / melting point	242.7 C

Published property ranges

Density (g/cm3)	CAMPUS Plastics: 1.921–2.172; MatWeb: 1.963–2.108; Polymer handbook: 2.005–2.153
Young's modulus (GPa)	CAMPUS Plastics: 0.815–0.978; MatWeb: 0.859–0.911; Polymer handbook: 0.903–0.958
Thermal conductivity (W/mK)	CAMPUS Plastics: 0.2–0.276; MatWeb: 0.227–0.234; Polymer handbook: 0.255–0.264

Ranges are representative values from the cited handbooks/datasheets; use manufacturer datasheets for design allowables.

Typical uses

chemical-resistant lining
Seals
wire insulation
semiconductor chemical parts

Frequently asked questions

What is the density of Arkema-Kynar-760 (Conditioned)?

The density of Arkema-Kynar-760 (Conditioned) is 1.992 g/cm3.

What is Arkema-Kynar-760 (Conditioned) used for?

Arkema-Kynar-760 (Conditioned) is typically used for chemical-resistant lining, Seals, wire insulation and semiconductor chemical parts.

What condition does Arkema-Kynar-760-COND refer to?

Arkema-Kynar-760-COND refers to the "Conditioned" condition: Conditioned representative condition.

What category of material is Arkema-Kynar-760 (Conditioned)?

Arkema-Kynar-760 (Conditioned) is categorized as polymer (family: fluoropolymer).