Arkema-Kynar-741 (Conditioned)

Arkema-Kynar-741 (Conditioned) material properties: Density 2.028 g/cm3, Young's modulus 0.88 GPa, Yield strength 26.9 MPa (representative value; grade and...

Overview

polymer · fluoropolymer — Conditioned representative condition

Grade designation: Arkema-Kynar-741-COND

Arkema-Kynar-741; manufacturer/trade: Arkema; curated real material/grade family record

Curated real material/grade record. Arkema trade or supplier catalog grade retained from grade name. Property values are representative literature ranges; consult linked references, standards, and manufacturer datasheets for design allowables.

Key material properties

Density	2.028 g/cm3
Young's modulus	0.88 GPa
Yield strength	26.9 MPa (representative value; grade and condition dependent)
Thermal conductivity	0.23 W/mK
Heat resistance / melting point	253.6 C

Published property ranges

Density (g/cm3)	CAMPUS Plastics: 1.951–2.095; MatWeb: 1.993–2.14; Polymer handbook: 1.934–2.185
Young's modulus (GPa)	CAMPUS Plastics: 0.846–0.897; MatWeb: 0.89–0.944; Polymer handbook: 0.828–0.992
Thermal conductivity (W/mK)	CAMPUS Plastics: 0.219–0.225; MatWeb: 0.247–0.255; Polymer handbook: 0.208–0.285

Ranges are representative values from the cited handbooks/datasheets; use manufacturer datasheets for design allowables.

Typical uses

chemical-resistant lining
Seals
wire insulation
semiconductor chemical parts

Frequently asked questions

What is the density of Arkema-Kynar-741 (Conditioned)?

The density of Arkema-Kynar-741 (Conditioned) is 2.028 g/cm3.

What is Arkema-Kynar-741 (Conditioned) used for?

Arkema-Kynar-741 (Conditioned) is typically used for chemical-resistant lining, Seals, wire insulation and semiconductor chemical parts.

What condition does Arkema-Kynar-741-COND refer to?

Arkema-Kynar-741-COND refers to the "Conditioned" condition: Conditioned representative condition.

What category of material is Arkema-Kynar-741 (Conditioned)?

Arkema-Kynar-741 (Conditioned) is categorized as polymer (family: fluoropolymer).