Arkema-Kynar-740-PVDF (Conditioned)
Arkema-Kynar-740-PVDF (Conditioned) material properties: Density 2.065 g/cm3, Young's modulus 0.91 GPa, Yield strength 28.8 MPa (representative value; grade...
Overview
polymer · fluoropolymer — Conditioned representative condition
Grade designation: Arkema-Kynar-740-PVDF-COND
Arkema-Kynar-740-PVDF; manufacturer/trade: Arkema; curated real material/grade family record
Curated real material/grade record. Arkema trade or supplier catalog grade retained from grade name. Property values are representative literature ranges; consult linked references, standards, and manufacturer datasheets for design allowables.
Key material properties
| Density | 2.065 g/cm3 |
|---|---|
| Young's modulus | 0.91 GPa |
| Yield strength | 28.8 MPa (representative value; grade and condition dependent) |
| Thermal conductivity | 0.247 W/mK |
| Heat resistance / melting point | 264.5 C |
Published property ranges
| Density (g/cm3) | CAMPUS Plastics: 1.98–2.127; MatWeb: 1.921–2.172; Polymer handbook: 1.963–2.108 |
|---|---|
| Young's modulus (GPa) | CAMPUS Plastics: 0.877–0.93; MatWeb: 0.815–0.978; Polymer handbook: 0.859–0.911 |
| Thermal conductivity (W/mK) | CAMPUS Plastics: 0.238–0.246; MatWeb: 0.2–0.276; Polymer handbook: 0.227–0.234 |
Ranges are representative values from the cited handbooks/datasheets; use manufacturer datasheets for design allowables.
Typical uses
- chemical-resistant lining
- Seals
- wire insulation
- semiconductor chemical parts
Frequently asked questions
What is the density of Arkema-Kynar-740-PVDF (Conditioned)?
The density of Arkema-Kynar-740-PVDF (Conditioned) is 2.065 g/cm3.
What is Arkema-Kynar-740-PVDF (Conditioned) used for?
Arkema-Kynar-740-PVDF (Conditioned) is typically used for chemical-resistant lining, Seals, wire insulation and semiconductor chemical parts.
What condition does Arkema-Kynar-740-PVDF-COND refer to?
Arkema-Kynar-740-PVDF-COND refers to the "Conditioned" condition: Conditioned representative condition.
What category of material is Arkema-Kynar-740-PVDF (Conditioned)?
Arkema-Kynar-740-PVDF (Conditioned) is categorized as polymer (family: fluoropolymer).
Internal tools
Related materials
- Chemours-Teflon-ETFE-200 (Conditioned)
- Chemours-Teflon-ETFE-200 (Dry-as-molded)
- Chemours-Teflon-ETFE-EP-541 (Conditioned)
- Chemours-Teflon-ETFE-EP-541 (Dry-as-molded)
- Chemours-Teflon-ETFE-LM-740AP (Conditioned)
- Chemours-Teflon-ETFE-LM-740AP (Dry-as-molded)
- Ensinger-TECAFORM-AH-CF-PEEK (Conditioned)
- Ensinger-TECAFORM-AH-CF-PEEK (Dry-as-molded)
References
- Polymer Data Handbook / CAMPUS-style datasheet references (Polymer handbook)
- Polyvinylidene fluoride — PubChem compound entry (PubChem (NCBI))
- Polymer Data Handbook / CAMPUS-style datasheet references