Arkema-Kynar-720 (Conditioned)

Arkema-Kynar-720 (Conditioned) material properties: Density 1.998 g/cm3, Young's modulus 0.85 GPa, Yield strength 25.4 MPa (representative value; grade and...

Overview

polymer · fluoropolymer — Conditioned representative condition

Grade designation: Arkema-Kynar-720-COND

Arkema-Kynar-720; manufacturer/trade: Arkema; curated real material/grade family record

Curated real material/grade record. Arkema trade or supplier catalog grade retained from grade name. Property values are representative literature ranges; consult linked references, standards, and manufacturer datasheets for design allowables.

Key material properties

Density	1.998 g/cm3
Young's modulus	0.85 GPa
Yield strength	25.4 MPa (representative value; grade and condition dependent)
Thermal conductivity	0.216 W/mK
Heat resistance / melting point	244.5 C

Published property ranges

Density (g/cm3)	CAMPUS Plastics: 1.926–2.177; MatWeb: 1.968–2.113; Polymer handbook: 2.01–2.159
Young's modulus (GPa)	CAMPUS Plastics: 0.82–0.984; MatWeb: 0.864–0.916; Polymer handbook: 0.908–0.964
Thermal conductivity (W/mK)	CAMPUS Plastics: 0.203–0.279; MatWeb: 0.23–0.237; Polymer handbook: 0.258–0.267

Ranges are representative values from the cited handbooks/datasheets; use manufacturer datasheets for design allowables.

Typical uses

chemical-resistant lining
Seals
wire insulation
semiconductor chemical parts

Frequently asked questions

What is the density of Arkema-Kynar-720 (Conditioned)?

The density of Arkema-Kynar-720 (Conditioned) is 1.998 g/cm3.

What is Arkema-Kynar-720 (Conditioned) used for?

Arkema-Kynar-720 (Conditioned) is typically used for chemical-resistant lining, Seals, wire insulation and semiconductor chemical parts.

What condition does Arkema-Kynar-720-COND refer to?

Arkema-Kynar-720-COND refers to the "Conditioned" condition: Conditioned representative condition.

What category of material is Arkema-Kynar-720 (Conditioned)?

Arkema-Kynar-720 (Conditioned) is categorized as polymer (family: fluoropolymer).