Arkema-Kynar-710 (Conditioned)

Arkema-Kynar-710 (Conditioned) material properties: Density 1.995 g/cm3, Young's modulus 0.85 GPa, Yield strength 25.2 MPa (representative value; grade and...

Overview

polymer · fluoropolymer — Conditioned representative condition

Grade designation: Arkema-Kynar-710-COND

Arkema-Kynar-710; manufacturer/trade: Arkema; curated real material/grade family record

Curated real material/grade record. Arkema trade or supplier catalog grade retained from grade name. Property values are representative literature ranges; consult linked references, standards, and manufacturer datasheets for design allowables.

Key material properties

Density	1.995 g/cm3
Young's modulus	0.85 GPa
Yield strength	25.2 MPa (representative value; grade and condition dependent)
Thermal conductivity	0.214 W/mK
Heat resistance / melting point	243.6 C

Published property ranges

Density (g/cm3)	CAMPUS Plastics: 1.924–2.175; MatWeb: 1.966–2.111; Polymer handbook: 2.007–2.156
Young's modulus (GPa)	CAMPUS Plastics: 0.817–0.981; MatWeb: 0.861–0.914; Polymer handbook: 0.905–0.961
Thermal conductivity (W/mK)	CAMPUS Plastics: 0.201–0.278; MatWeb: 0.229–0.236; Polymer handbook: 0.256–0.265

Ranges are representative values from the cited handbooks/datasheets; use manufacturer datasheets for design allowables.

Typical uses

chemical-resistant lining
Seals
wire insulation
semiconductor chemical parts

Frequently asked questions

What is the density of Arkema-Kynar-710 (Conditioned)?

The density of Arkema-Kynar-710 (Conditioned) is 1.995 g/cm3.

What is Arkema-Kynar-710 (Conditioned) used for?

Arkema-Kynar-710 (Conditioned) is typically used for chemical-resistant lining, Seals, wire insulation and semiconductor chemical parts.

What condition does Arkema-Kynar-710-COND refer to?

Arkema-Kynar-710-COND refers to the "Conditioned" condition: Conditioned representative condition.

What category of material is Arkema-Kynar-710 (Conditioned)?

Arkema-Kynar-710 (Conditioned) is categorized as polymer (family: fluoropolymer).