AGC-Fluon-PVDF-5130 (Conditioned)
AGC-Fluon-PVDF-5130 (Conditioned) material properties: Density 2.035 g/cm3, Young's modulus 0.89 GPa, Yield strength 27.2 MPa (representative value; grade...
Overview
polymer · fluoropolymer — Conditioned representative condition
Grade designation: AGC-Fluon-PVDF-5130-COND
AGC-Fluon-PVDF-5130; manufacturer/trade: AGC; curated real material/grade family record
Curated real material/grade record. AGC trade or supplier catalog grade retained from grade name. Property values are representative literature ranges; consult linked references, standards, and manufacturer datasheets for design allowables.
Key material properties
| Density | 2.035 g/cm3 |
|---|---|
| Young's modulus | 0.89 GPa |
| Yield strength | 27.2 MPa (representative value; grade and condition dependent) |
| Thermal conductivity | 0.233 W/mK |
| Heat resistance / melting point | 255.5 C |
Published property ranges
| Density (g/cm3) | CAMPUS Plastics: 1.956–2.1; MatWeb: 1.998–2.145; Polymer handbook: 1.938–2.081 |
|---|---|
| Young's modulus (GPa) | CAMPUS Plastics: 0.851–0.902; MatWeb: 0.895–0.95; Polymer handbook: 0.833–0.883 |
| Thermal conductivity (W/mK) | CAMPUS Plastics: 0.222–0.229; MatWeb: 0.25–0.258; Polymer handbook: 0.211–0.216 |
Ranges are representative values from the cited handbooks/datasheets; use manufacturer datasheets for design allowables.
Typical uses
- chemical-resistant lining
- Seals
- wire insulation
- semiconductor chemical parts
Frequently asked questions
What is the density of AGC-Fluon-PVDF-5130 (Conditioned)?
The density of AGC-Fluon-PVDF-5130 (Conditioned) is 2.035 g/cm3.
What is AGC-Fluon-PVDF-5130 (Conditioned) used for?
AGC-Fluon-PVDF-5130 (Conditioned) is typically used for chemical-resistant lining, Seals, wire insulation and semiconductor chemical parts.
What condition does AGC-Fluon-PVDF-5130-COND refer to?
AGC-Fluon-PVDF-5130-COND refers to the "Conditioned" condition: Conditioned representative condition.
What category of material is AGC-Fluon-PVDF-5130 (Conditioned)?
AGC-Fluon-PVDF-5130 (Conditioned) is categorized as polymer (family: fluoropolymer).
Internal tools
Related materials
- Chemours-Teflon-ETFE-200 (Conditioned)
- Chemours-Teflon-ETFE-200 (Dry-as-molded)
- Chemours-Teflon-ETFE-EP-541 (Conditioned)
- Chemours-Teflon-ETFE-EP-541 (Dry-as-molded)
- Chemours-Teflon-ETFE-LM-740AP (Conditioned)
- Chemours-Teflon-ETFE-LM-740AP (Dry-as-molded)
- Ensinger-TECAFORM-AH-CF-PEEK (Conditioned)
- Ensinger-TECAFORM-AH-CF-PEEK (Dry-as-molded)
References
- Polymer Data Handbook / CAMPUS-style datasheet references (Polymer handbook)
- Polyvinylidene fluoride — PubChem compound entry (PubChem (NCBI))
- Polymer Data Handbook / CAMPUS-style datasheet references