AGC-Fluon-PTFE-F7 (Conditioned)

AGC-Fluon-PTFE-F7 (Conditioned) material properties: Density 2.05 g/cm3, Young's modulus 0.9 GPa, Yield strength 28 MPa (representative value; grade and...

Overview

polymer · fluoropolymer — Conditioned representative condition

Grade designation: AGC-Fluon-PTFE-F7-COND

AGC-Fluon-PTFE-F7; manufacturer/trade: AGC; curated real material/grade family record

Curated real material/grade record. AGC trade or supplier catalog grade retained from grade name. Property values are representative literature ranges; consult linked references, standards, and manufacturer datasheets for design allowables.

Key material properties

Density	2.05 g/cm3
Young's modulus	0.9 GPa
Yield strength	28 MPa (representative value; grade and condition dependent)
Thermal conductivity	0.24 W/mK
Heat resistance / melting point	260 C

Published property ranges

Density (g/cm3)	CAMPUS Plastics: 1.968–2.113; MatWeb: 2.01–2.159; Polymer handbook: 1.951–2.095
Young's modulus (GPa)	CAMPUS Plastics: 0.864–0.916; MatWeb: 0.908–0.964; Polymer handbook: 0.846–0.897
Thermal conductivity (W/mK)	CAMPUS Plastics: 0.23–0.237; MatWeb: 0.258–0.267; Polymer handbook: 0.219–0.225

Ranges are representative values from the cited handbooks/datasheets; use manufacturer datasheets for design allowables.

Typical uses

chemical-resistant lining
Seals
wire insulation
semiconductor chemical parts

Frequently asked questions

What is the density of AGC-Fluon-PTFE-F7 (Conditioned)?

The density of AGC-Fluon-PTFE-F7 (Conditioned) is 2.05 g/cm3.

What is AGC-Fluon-PTFE-F7 (Conditioned) used for?

AGC-Fluon-PTFE-F7 (Conditioned) is typically used for chemical-resistant lining, Seals, wire insulation and semiconductor chemical parts.

What condition does AGC-Fluon-PTFE-F7-COND refer to?

AGC-Fluon-PTFE-F7-COND refers to the "Conditioned" condition: Conditioned representative condition.

What category of material is AGC-Fluon-PTFE-F7 (Conditioned)?

AGC-Fluon-PTFE-F7 (Conditioned) is categorized as polymer (family: fluoropolymer).