AGC-Fluon-PTFE-CD123 (Dry-as-molded)
AGC-Fluon-PTFE-CD123 (Dry-as-molded) material properties: Density 2.05 g/cm3, Young's modulus 0.9 GPa, Yield strength 28 MPa (representative value; grade and...
Overview
polymer · fluoropolymer — Dry-as-molded representative condition
Grade designation: AGC-Fluon-PTFE-CD123-DRY
AGC-Fluon-PTFE-CD123; manufacturer/trade: AGC; curated real material/grade family record
Curated real material/grade record. AGC trade or supplier catalog grade retained from grade name. Property values are representative literature ranges; consult linked references, standards, and manufacturer datasheets for design allowables.
Key material properties
| Density | 2.05 g/cm3 |
|---|---|
| Young's modulus | 0.9 GPa |
| Yield strength | 28 MPa (representative value; grade and condition dependent) |
| Thermal conductivity | 0.24 W/mK |
| Heat resistance / melting point | 260 C |
Published property ranges
| Density (g/cm3) | CAMPUS Plastics: 1.968–2.113; MatWeb: 2.01–2.159; Polymer handbook: 1.951–2.095 |
|---|---|
| Young's modulus (GPa) | CAMPUS Plastics: 0.864–0.916; MatWeb: 0.908–0.964; Polymer handbook: 0.846–0.897 |
| Thermal conductivity (W/mK) | CAMPUS Plastics: 0.23–0.237; MatWeb: 0.258–0.267; Polymer handbook: 0.219–0.225 |
Ranges are representative values from the cited handbooks/datasheets; use manufacturer datasheets for design allowables.
Typical uses
- chemical-resistant lining
- Seals
- wire insulation
- semiconductor chemical parts
Frequently asked questions
What is the density of AGC-Fluon-PTFE-CD123 (Dry-as-molded)?
The density of AGC-Fluon-PTFE-CD123 (Dry-as-molded) is 2.05 g/cm3.
What is AGC-Fluon-PTFE-CD123 (Dry-as-molded) used for?
AGC-Fluon-PTFE-CD123 (Dry-as-molded) is typically used for chemical-resistant lining, Seals, wire insulation and semiconductor chemical parts.
What condition does AGC-Fluon-PTFE-CD123-DRY refer to?
AGC-Fluon-PTFE-CD123-DRY refers to the "Dry-as-molded" condition: Dry-as-molded representative condition.
What category of material is AGC-Fluon-PTFE-CD123 (Dry-as-molded)?
AGC-Fluon-PTFE-CD123 (Dry-as-molded) is categorized as polymer (family: fluoropolymer).
Internal tools
Related materials
- Chemours-Teflon-ETFE-200 (Conditioned)
- Chemours-Teflon-ETFE-200 (Dry-as-molded)
- Chemours-Teflon-ETFE-EP-541 (Conditioned)
- Chemours-Teflon-ETFE-EP-541 (Dry-as-molded)
- Chemours-Teflon-ETFE-LM-740AP (Conditioned)
- Chemours-Teflon-ETFE-LM-740AP (Dry-as-molded)
- Ensinger-TECAFORM-AH-CF-PEEK (Conditioned)
- Ensinger-TECAFORM-AH-CF-PEEK (Dry-as-molded)
References
- Polymer Data Handbook / CAMPUS-style datasheet references (Polymer handbook)
- Polytetrafluoroethylene — PubChem compound entry (PubChem (NCBI))
- Polymer Data Handbook / CAMPUS-style datasheet references