3M-Dyneon-PTFE-TFM-L206 (Conditioned)
3M-Dyneon-PTFE-TFM-L206 (Conditioned) material properties: Density 2.01 g/cm3, Young's modulus 0.86 GPa, Yield strength 26 MPa (representative value; grade...
Overview
polymer · fluoropolymer — Conditioned representative condition
Grade designation: 3M-Dyneon-PTFE-TFM-L206-COND
3M-Dyneon-PTFE-TFM-L206; manufacturer/trade: 3M; curated real material/grade family record
Curated real material/grade record. 3M trade or supplier catalog grade retained from grade name. Property values are representative literature ranges; consult linked references, standards, and manufacturer datasheets for design allowables.
Key material properties
| Density | 2.01 g/cm3 |
|---|---|
| Young's modulus | 0.86 GPa |
| Yield strength | 26 MPa (representative value; grade and condition dependent) |
| Thermal conductivity | 0.221 W/mK |
| Heat resistance / melting point | 248.2 C |
Published property ranges
| Density (g/cm3) | CAMPUS Plastics: 1.936–2.079; MatWeb: 1.978–2.124; Polymer handbook: 1.919–2.169 |
|---|---|
| Young's modulus (GPa) | CAMPUS Plastics: 0.83–0.88; MatWeb: 0.874–0.928; Polymer handbook: 0.812–0.975 |
| Thermal conductivity (W/mK) | CAMPUS Plastics: 0.209–0.215; MatWeb: 0.237–0.244; Polymer handbook: 0.198–0.274 |
Ranges are representative values from the cited handbooks/datasheets; use manufacturer datasheets for design allowables.
Typical uses
- chemical-resistant lining
- Seals
- wire insulation
- semiconductor chemical parts
Frequently asked questions
What is the density of 3M-Dyneon-PTFE-TFM-L206 (Conditioned)?
The density of 3M-Dyneon-PTFE-TFM-L206 (Conditioned) is 2.01 g/cm3.
What is 3M-Dyneon-PTFE-TFM-L206 (Conditioned) used for?
3M-Dyneon-PTFE-TFM-L206 (Conditioned) is typically used for chemical-resistant lining, Seals, wire insulation and semiconductor chemical parts.
What condition does 3M-Dyneon-PTFE-TFM-L206-COND refer to?
3M-Dyneon-PTFE-TFM-L206-COND refers to the "Conditioned" condition: Conditioned representative condition.
What category of material is 3M-Dyneon-PTFE-TFM-L206 (Conditioned)?
3M-Dyneon-PTFE-TFM-L206 (Conditioned) is categorized as polymer (family: fluoropolymer).
Internal tools
Related materials
- Chemours-Teflon-ETFE-200 (Conditioned)
- Chemours-Teflon-ETFE-200 (Dry-as-molded)
- Chemours-Teflon-ETFE-EP-541 (Conditioned)
- Chemours-Teflon-ETFE-EP-541 (Dry-as-molded)
- Chemours-Teflon-ETFE-LM-740AP (Conditioned)
- Chemours-Teflon-ETFE-LM-740AP (Dry-as-molded)
- Ensinger-TECAFORM-AH-CF-PEEK (Conditioned)
- Ensinger-TECAFORM-AH-CF-PEEK (Dry-as-molded)
References
- Polymer Data Handbook / CAMPUS-style datasheet references (Polymer handbook)
- Polytetrafluoroethylene — PubChem compound entry (PubChem (NCBI))
- Polymer Data Handbook / CAMPUS-style datasheet references