Solvay-CYCOM-CF-PPS (Molded composite)
Solvay-CYCOM-CF-PPS (Molded composite) material properties: Density 1.571 g/cm3, Young's modulus 77.02 GPa, Yield strength 682.2 MPa (representative value...
Overview
ceramic · polymer matrix composite — Molded composite representative condition
Grade designation: Solvay-CYCOM-CF-PPS-MOLD
Solvay-CYCOM-CF-PPS; manufacturer/trade: Solvay; curated real material/grade family record
Curated real material/grade record. Solvay trade or supplier catalog grade retained from grade name. Property values are representative literature ranges; consult linked references, standards, and manufacturer datasheets for design allowables.
Key material properties
| Density | 1.571 g/cm3 |
|---|---|
| Young's modulus | 77.02 GPa |
| Yield strength | 682.2 MPa (representative value; grade and condition dependent) |
| Thermal conductivity | 1.054 W/mK |
| Heat resistance / melting point | 165 C |
Published property ranges
| Density (g/cm3) | MatWeb: 1.505–1.616; AZoM: 1.46–1.65; ASM/handbook: 1.492–1.602 |
|---|---|
| Young's modulus (GPa) | MatWeb: 73.944–78.468; AZoM: 68.76–82.446; ASM/handbook: 72.432–76.83 |
| Thermal conductivity (W/mK) | MatWeb: 1.02–1.055; AZoM: 0.859–1.178; ASM/handbook: 0.973–1.004 |
Ranges are representative values from the cited handbooks/datasheets; use manufacturer datasheets for design allowables.
Typical uses
- aircraft structure
- car body
- pressure vessel
- sporting goods
Frequently asked questions
What is the density of Solvay-CYCOM-CF-PPS (Molded composite)?
The density of Solvay-CYCOM-CF-PPS (Molded composite) is 1.571 g/cm3.
What is Solvay-CYCOM-CF-PPS (Molded composite) used for?
Solvay-CYCOM-CF-PPS (Molded composite) is typically used for aircraft structure, car body, pressure vessel and sporting goods.
What condition does Solvay-CYCOM-CF-PPS-MOLD refer to?
Solvay-CYCOM-CF-PPS-MOLD refers to the "Molded composite" condition: Molded composite representative condition.
What category of material is Solvay-CYCOM-CF-PPS (Molded composite)?
Solvay-CYCOM-CF-PPS (Molded composite) is categorized as ceramic (family: polymer matrix composite).
Internal tools
Related materials
- BN-Si3N4-composite (Ceramic matrix composite)
- BN-Si3N4-composite (High-temperature service)
- Hexcel-HexPly-APC-2-PEEK-AS4 (Laminate)
- Hexcel-HexPly-APC-2-PEEK-AS4 (Molded composite)
- Hexcel-HexPly-APC-2-PEEK (Laminate)
- Hexcel-HexPly-APC-2-PEEK (Molded composite)
- Hexcel-HexPly-CF-PEEK (Laminate)
- Hexcel-HexPly-CF-PEEK (Molded composite)
References
- ASM Handbooks / Engineering Alloy Reference (ASM/handbook)
- Polyphenylene sulfide — PubChem compound entry (PubChem (NCBI))
- Bisphenol A diglycidyl ether — PubChem compound entry (PubChem (NCBI))
- ASM Handbooks / Engineering Alloy Reference