Hexcel-HexPly-CF-PPS (Molded composite)
Hexcel-HexPly-CF-PPS (Molded composite) material properties: Density 1.51 g/cm3, Young's modulus 71.18 GPa, Yield strength 589.2 MPa (representative value...
Overview
ceramic · polymer matrix composite — Molded composite representative condition
Grade designation: Hexcel-HexPly-CF-PPS-MOLD
Hexcel-HexPly-CF-PPS; manufacturer/trade: Hexcel; curated real material/grade family record
Curated real material/grade record. Hexcel trade or supplier catalog grade retained from grade name. Property values are representative literature ranges; consult linked references, standards, and manufacturer datasheets for design allowables.
Key material properties
| Density | 1.51 g/cm3 |
|---|---|
| Young's modulus | 71.18 GPa |
| Yield strength | 589.2 MPa (representative value; grade and condition dependent) |
| Thermal conductivity | 0.898 W/mK |
| Heat resistance / melting point | 150.5 C |
Published property ranges
| Density (g/cm3) | MatWeb: 1.456–1.646; AZoM: 1.488–1.598; ASM/handbook: 1.52–1.632 |
|---|---|
| Young's modulus (GPa) | MatWeb: 68.328–81.978; AZoM: 72–76.362; ASM/handbook: 75.672–80.34 |
| Thermal conductivity (W/mK) | MatWeb: 0.846–1.164; AZoM: 0.96–0.989; ASM/handbook: 1.074–1.113 |
Ranges are representative values from the cited handbooks/datasheets; use manufacturer datasheets for design allowables.
Typical uses
- aircraft structure
- car body
- pressure vessel
- sporting goods
Frequently asked questions
What is the density of Hexcel-HexPly-CF-PPS (Molded composite)?
The density of Hexcel-HexPly-CF-PPS (Molded composite) is 1.51 g/cm3.
What is Hexcel-HexPly-CF-PPS (Molded composite) used for?
Hexcel-HexPly-CF-PPS (Molded composite) is typically used for aircraft structure, car body, pressure vessel and sporting goods.
What condition does Hexcel-HexPly-CF-PPS-MOLD refer to?
Hexcel-HexPly-CF-PPS-MOLD refers to the "Molded composite" condition: Molded composite representative condition.
What category of material is Hexcel-HexPly-CF-PPS (Molded composite)?
Hexcel-HexPly-CF-PPS (Molded composite) is categorized as ceramic (family: polymer matrix composite).
Internal tools
Related materials
- BN-Si3N4-composite (Ceramic matrix composite)
- BN-Si3N4-composite (High-temperature service)
- Hexcel-HexPly-APC-2-PEEK-AS4 (Laminate)
- Hexcel-HexPly-APC-2-PEEK-AS4 (Molded composite)
- Hexcel-HexPly-APC-2-PEEK (Laminate)
- Hexcel-HexPly-APC-2-PEEK (Molded composite)
- Hexcel-HexPly-CF-PEEK (Laminate)
- Hexcel-HexPly-CF-PEEK (Molded composite)
References
- ASM Handbooks / Engineering Alloy Reference (ASM/handbook)
- Polyphenylene sulfide — PubChem compound entry (PubChem (NCBI))
- Bisphenol A diglycidyl ether — PubChem compound entry (PubChem (NCBI))
- ASM Handbooks / Engineering Alloy Reference