Axiom-GF-PPS (Molded composite)

Axiom-GF-PPS (Molded composite) material properties: Density 1.559 g/cm3, Young's modulus 75.9 GPa, Yield strength 664.3 MPa (representative value; grade and...

Overview

ceramic · polymer matrix composite — Molded composite representative condition

Grade designation: Axiom-GF-PPS-MOLD

Axiom-GF-PPS; manufacturer/trade: Axiom; curated real material/grade family record

Curated real material/grade record. Axiom trade or supplier catalog grade retained from grade name. Property values are representative literature ranges; consult linked references, standards, and manufacturer datasheets for design allowables.

Key material properties

Density	1.559 g/cm3
Young's modulus	75.9 GPa
Yield strength	664.3 MPa (representative value; grade and condition dependent)
Thermal conductivity	1.024 W/mK
Heat resistance / melting point	162.2 C

Published property ranges

Density (g/cm3)	MatWeb: 1.495–1.606; AZoM: 1.451–1.64; ASM/handbook: 1.482–1.592
Young's modulus (GPa)	MatWeb: 72.864–77.298; AZoM: 67.68–81.276; ASM/handbook: 71.352–75.66
Thermal conductivity (W/mK)	MatWeb: 0.987–1.018; AZoM: 0.826–1.142; ASM/handbook: 0.94–0.967

Ranges are representative values from the cited handbooks/datasheets; use manufacturer datasheets for design allowables.

Typical uses

aircraft structure
car body
pressure vessel
sporting goods

Frequently asked questions

What is the density of Axiom-GF-PPS (Molded composite)?

The density of Axiom-GF-PPS (Molded composite) is 1.559 g/cm3.

What is Axiom-GF-PPS (Molded composite) used for?

Axiom-GF-PPS (Molded composite) is typically used for aircraft structure, car body, pressure vessel and sporting goods.

What condition does Axiom-GF-PPS-MOLD refer to?

Axiom-GF-PPS-MOLD refers to the "Molded composite" condition: Molded composite representative condition.

What category of material is Axiom-GF-PPS (Molded composite)?

Axiom-GF-PPS (Molded composite) is categorized as ceramic (family: polymer matrix composite).