Axiom-GF-PEI (Molded composite)

Axiom-GF-PEI (Molded composite) material properties: Density 1.583 g/cm3, Young's modulus 78.15 GPa, Yield strength 700.1 MPa (representative value; grade...

Overview

ceramic · polymer matrix composite — Molded composite representative condition

Grade designation: Axiom-GF-PEI-MOLD

Axiom-GF-PEI; manufacturer/trade: Axiom; curated real material/grade family record

Curated real material/grade record. Axiom trade or supplier catalog grade retained from grade name. Property values are representative literature ranges; consult linked references, standards, and manufacturer datasheets for design allowables.

Key material properties

Density	1.583 g/cm3
Young's modulus	78.15 GPa
Yield strength	700.1 MPa (representative value; grade and condition dependent)
Thermal conductivity	1.084 W/mK
Heat resistance / melting point	167.8 C

Published property ranges

Density (g/cm3)	MatWeb: 1.514–1.626; AZoM: 1.469–1.578; ASM/handbook: 1.501–1.612
Young's modulus (GPa)	MatWeb: 75.024–79.638; AZoM: 69.84–74.022; ASM/handbook: 73.512–78
Thermal conductivity (W/mK)	MatWeb: 1.054–1.091; AZoM: 0.893–0.916; ASM/handbook: 1.007–1.04

Ranges are representative values from the cited handbooks/datasheets; use manufacturer datasheets for design allowables.

Typical uses

aircraft structure
car body
pressure vessel
sporting goods

Frequently asked questions

What is the density of Axiom-GF-PEI (Molded composite)?

The density of Axiom-GF-PEI (Molded composite) is 1.583 g/cm3.

What is Axiom-GF-PEI (Molded composite) used for?

Axiom-GF-PEI (Molded composite) is typically used for aircraft structure, car body, pressure vessel and sporting goods.

What condition does Axiom-GF-PEI-MOLD refer to?

Axiom-GF-PEI-MOLD refers to the "Molded composite" condition: Molded composite representative condition.

What category of material is Axiom-GF-PEI (Molded composite)?

Axiom-GF-PEI (Molded composite) is categorized as ceramic (family: polymer matrix composite).