Axiom-CF-PPS (Molded composite)

Axiom-CF-PPS (Molded composite) material properties: Density 1.585 g/cm3, Young's modulus 78.38 GPa, Yield strength 703.6 MPa (representative value; grade...

Overview

ceramic · polymer matrix composite — Molded composite representative condition

Grade designation: Axiom-CF-PPS-MOLD

Axiom-CF-PPS; manufacturer/trade: Axiom; curated real material/grade family record

Curated real material/grade record. Axiom trade or supplier catalog grade retained from grade name. Property values are representative literature ranges; consult linked references, standards, and manufacturer datasheets for design allowables.

Key material properties

Density	1.585 g/cm3
Young's modulus	78.38 GPa
Yield strength	703.6 MPa (representative value; grade and condition dependent)
Thermal conductivity	1.09 W/mK
Heat resistance / melting point	168.4 C

Published property ranges

Density (g/cm3)	MatWeb: 1.516–1.628; AZoM: 1.471–1.58; ASM/handbook: 1.503–1.614
Young's modulus (GPa)	MatWeb: 75.24–79.872; AZoM: 70.056–74.256; ASM/handbook: 73.728–78.234
Thermal conductivity (W/mK)	MatWeb: 1.061–1.098; AZoM: 0.9–0.924; ASM/handbook: 1.014–1.047

Ranges are representative values from the cited handbooks/datasheets; use manufacturer datasheets for design allowables.

Typical uses

aircraft structure
car body
pressure vessel
sporting goods

Frequently asked questions

What is the density of Axiom-CF-PPS (Molded composite)?

The density of Axiom-CF-PPS (Molded composite) is 1.585 g/cm3.

What is Axiom-CF-PPS (Molded composite) used for?

Axiom-CF-PPS (Molded composite) is typically used for aircraft structure, car body, pressure vessel and sporting goods.

What condition does Axiom-CF-PPS-MOLD refer to?

Axiom-CF-PPS-MOLD refers to the "Molded composite" condition: Molded composite representative condition.

What category of material is Axiom-CF-PPS (Molded composite)?

Axiom-CF-PPS (Molded composite) is categorized as ceramic (family: polymer matrix composite).