Axiom-CF-PEEK (Molded composite)

Axiom-CF-PEEK (Molded composite) material properties: Density 1.513 g/cm3, Young's modulus 71.4 GPa, Yield strength 592.8 MPa (representative value; grade...

Overview

ceramic · polymer matrix composite — Molded composite representative condition

Grade designation: Axiom-CF-PEEK-MOLD

Axiom-CF-PEEK; manufacturer/trade: Axiom; curated real material/grade family record

Curated real material/grade record. Axiom trade or supplier catalog grade retained from grade name. Property values are representative literature ranges; consult linked references, standards, and manufacturer datasheets for design allowables.

Key material properties

Density	1.513 g/cm3
Young's modulus	71.4 GPa
Yield strength	592.8 MPa (representative value; grade and condition dependent)
Thermal conductivity	0.904 W/mK
Heat resistance / melting point	151 C

Published property ranges

Density (g/cm3)	MatWeb: 1.458–1.648; AZoM: 1.49–1.6; ASM/handbook: 1.521–1.634
Young's modulus (GPa)	MatWeb: 68.544–82.212; AZoM: 72.216–76.596; ASM/handbook: 75.888–80.574
Thermal conductivity (W/mK)	MatWeb: 0.852–1.171; AZoM: 0.967–0.996; ASM/handbook: 1.081–1.12

Ranges are representative values from the cited handbooks/datasheets; use manufacturer datasheets for design allowables.

Typical uses

aircraft structure
car body
pressure vessel
sporting goods

Frequently asked questions

What is the density of Axiom-CF-PEEK (Molded composite)?

The density of Axiom-CF-PEEK (Molded composite) is 1.513 g/cm3.

What is Axiom-CF-PEEK (Molded composite) used for?

Axiom-CF-PEEK (Molded composite) is typically used for aircraft structure, car body, pressure vessel and sporting goods.

What condition does Axiom-CF-PEEK-MOLD refer to?

Axiom-CF-PEEK-MOLD refers to the "Molded composite" condition: Molded composite representative condition.

What category of material is Axiom-CF-PEEK (Molded composite)?

Axiom-CF-PEEK (Molded composite) is categorized as ceramic (family: polymer matrix composite).