Alumina-TiC-cutting (Ceramic matrix composite)
Alumina-TiC-cutting (Ceramic matrix composite) material properties: Density 2.553 g/cm3, Young's modulus 212.08 GPa, Yield strength 326.9 MPa (representative...
Overview
ceramic · ceramic matrix composite — Ceramic matrix composite representative condition
Grade designation: Alumina-TiC-cutting-CMC
Alumina-TiC-cutting; manufacturer/trade: Alumina; curated real material/grade family record
Curated real material/grade record. Alumina trade or supplier catalog grade retained from grade name. Property values are representative literature ranges; consult linked references, standards, and manufacturer datasheets for design allowables.
Key material properties
| Density | 2.553 g/cm3 |
|---|---|
| Young's modulus | 212.08 GPa |
| Yield strength | 326.9 MPa (representative value; grade and condition dependent) |
| Thermal conductivity | 16.704 W/mK |
| Heat resistance / melting point | 1245.4 C |
Published property ranges
| Density (g/cm3) | MatWeb: 2.459–2.64; AZoM: 2.512–2.697; ASM/handbook: 2.437–2.755 |
|---|---|
| Young's modulus (GPa) | MatWeb: 203.597–215.758; AZoM: 214.368–227.427; ASM/handbook: 199.162–239.096 |
| Thermal conductivity (W/mK) | MatWeb: 15.828–16.23; AZoM: 17.885–18.458; ASM/handbook: 14.982–20.686 |
Ranges are representative values from the cited handbooks/datasheets; use manufacturer datasheets for design allowables.
Typical uses
- turbine component
- brake
- thermal protection
- fusion material
Frequently asked questions
What is the density of Alumina-TiC-cutting (Ceramic matrix composite)?
The density of Alumina-TiC-cutting (Ceramic matrix composite) is 2.553 g/cm3.
What is Alumina-TiC-cutting (Ceramic matrix composite) used for?
Alumina-TiC-cutting (Ceramic matrix composite) is typically used for turbine component, brake, thermal protection and fusion material.
What condition does Alumina-TiC-cutting-CMC refer to?
Alumina-TiC-cutting-CMC refers to the "Ceramic matrix composite" condition: Ceramic matrix composite representative condition.
What category of material is Alumina-TiC-cutting (Ceramic matrix composite)?
Alumina-TiC-cutting (Ceramic matrix composite) is categorized as ceramic (family: ceramic matrix composite).
Internal tools
Related materials
- BN-Si3N4-composite (Ceramic matrix composite)
- BN-Si3N4-composite (High-temperature service)
- Hexcel-HexPly-APC-2-PEEK-AS4 (Laminate)
- Hexcel-HexPly-APC-2-PEEK-AS4 (Molded composite)
- Hexcel-HexPly-APC-2-PEEK (Laminate)
- Hexcel-HexPly-APC-2-PEEK (Molded composite)
- Hexcel-HexPly-CF-PEEK (Laminate)
- Hexcel-HexPly-CF-PEEK (Molded composite)
References
- ASM Handbooks / Engineering Alloy Reference (ASM/handbook)
- Aluminum oxide — PubChem compound entry (PubChem (NCBI))
- ASM Handbooks / Engineering Alloy Reference